The Dri-Eaz DriForce InterAir Drying System (formerly F211) delivers high-pressure air to remove moisture trapped in structural cavities for water damage restoration and restorative drying work. This system is engineered with high-pressure air technology and uses less than three amps of 115-volt power. To speed up drying time, use this complete system to dry different target areas simultaneously, including ceilings, walls, behind or under cabinets, and headers. Note: This DriForce System is not designed to extract water or debris. Its proper use is for the movement of air only. Restoration Versatility Together with the Injection and Extraction Drying Modes, the Dri-Eaz DriForce Wall Drying System contains every accessory to dry difficult-to-access areas and challenging materials, including lath and plaster, double-sheeted or firewalls, insulated walls, and walls covered with vinyl wallpaper or impermeable paint. Complete System Includes Select the complete DriForce Air Drying System with Airmover, or if you already have the DriForce Airmover base unit, select the DriForce Air Drying System Without Airmover option. This compact, lightweight drying system provides every accessory needed to restore even the most difficult-to-access areas: 7-Foot Crush-Proof Hoses with Cuffs (x 13) Manifolds (x 8) 400-foot Coil of PVC Tubing (x 1) 0.25-inch Injector Nozzles (x 100) Manifold End Caps (x 4) Coupler Fittings (x 5) T-Fittings (x 2) Tube Extender Connectors (x 25) 1 Muffler/Filter Wheeled Duffel Bags (x 2) Drying Speed and Efficiency With the Dri-Eaz DriForce InterAir Drying System, you can deliver a high-quality restoration service to your customers by returning structures to pre-loss conditions in less time, saving the property owner the cost of reconstruction. For maximum drying efficiency, the Dri-Eaz DriForce InterAir Drying System uses four drying mechanisms: Injection Mode: Forces dry air into structural cavities. Extraction Mode: Pulls moist air out of structural cavities. Dehumidification: When extra-dry air is required for drying difficult areas, position the output airflow from a dehumidifier near the DriForce air inlet. Heat: The blower motor generates heat, which increases the temperature of the air that enters the airflow for increased drying efficiency. Additional Features Air Nozzle Fins: The fins lock to form a tight seal between the air nozzle and the drilled hole. This feature is useful for drying ceilings. High Coverage: Treat over 90 feet of a 2 x 4 wall at one time. High-Pressure Air: Delivers up to 38 inches of static pressure using less than three amps of 115-volt power. Minimal Damage: The DriForce air nozzles need installation holes that are less than ¼-inch, reducing the time required to patch and repair holes. Durable Construction: Built for years of service for even the most difficult restoration jobs, the DriForce is built with durable, long-lasting materials, including a stainless steel-based frame and double-wall polyethylene housing. Compatible with the Rescue Mat System: To dry hardwood floors quickly, use this kit with the Dri-Eaz Rescue Mat Panel System. Sylvane's Expert Take The Dri-Eaz DriForce InterAir Drying System dries wet walls, ceilings, cabinets, and headers without damage.
Related
Related
Related
Related