DRILLMATE Portable Drill Press Frames & Accessories help apply controlled, even feed pressure when drilling with compatible electric, battery or air drills. Important: This listing contains three different product types: drill press frames, mounting kits and mini cutter sets. Each option is sold separately. Follow the steps below before selecting a variant. Key Features 14:1 force ratio helps reduce operator effort Provides controlled pressure at the drill bit or cutter Suitable setups are available for drill bits, holesaws and annular cutters Portable design for workshop and on-site drilling Variants & Compatibility Step 1 – Check Your Drill Collar The collar is the round section immediately behind the drill chuck. Measure its diameter and confirm that it has enough straight, parallel surface for the frame to clamp securely. A tapered, obstructed or very short collar cannot be clamped directly, even if its diameter is correct. Step 2 – Choose a Frame 43mm straight, clampable collar: choose the DM100 frame. 44mm, 45mm or 46mm straight, clampable collar: choose the DM100A frame. Its four-colour shim kit accommodates 43mm, 44mm, 45mm and 46mm collars. Tapered or non-clampable collar: choose the DM100 frame plus the appropriate mounting kit from Step 3. Frame Options – Frame Only DM100 – 43mm frame for compatible electric drills DM100A – 46mm frame for compatible air and electric drills; includes four-colour shim kit Step 3 – Choose a Mounting Kit for Your Application A mounting kit can be used when the drill collar cannot be clamped directly or when you need a specific chuck or arbour setup for drill bits, holesaws or annular cutters. You may still select a mounting kit even if your drill has a clampable collar. DMKIT1 – for standard drill bits and holesaws; includes a 43mm bearing mount, spindle and 1-13mm chuck DMKIT2 – for mini annular cutters from 8mm to 25.5mm; includes a 43mm bearing mount and mini arbour spindle DMKIT3 – for standard broach cutters with a 19mm Waldon shank, 25mm depth of cut and diameters up to 40mm; includes a 43mm bearing mount and arbour Optional Mini Cutter Sets DMHB01 – five imperial mini cutters: 7/16in, 1/2in, 9/16in, 5/8in and 3/4in DMHB702 – seven metric mini cutters: 8mm, 10mm, 12mm, 14mm, 16mm, 18mm and 20mm In the Box DM100: Drillmate DM100 frame DM100A: Drillmate DM100A frame and four-colour shim kit DMKIT1: 43mm bearing mount, spindle and 1-13mm chuck DMKIT2: 43mm bearing mount and mini arbour spindle DMKIT3: 43mm bearing mount and arbour for 19mm Waldon-shank broach cutters DMHB01: Arbour pin, Allen key, case and five imperial mini cutters DMHB702: Arbour pin, Allen key, centre punch, case and seven metric mini cutters Not Included: Battery, electric and air drills are not included. Frames, mounting kits and cutter sets are sold separately. Drill bits, holesaws and annular cutters are not included unless specifically listed with the selected cutter set.
