Professional Remote ID device attachable to any drone Designed with expert pilots in mind. Combination of both Network & Direct / Broadcast Remote ID to make your drone flight safe & compliant. Remote Identification Network Remote Identification Dronetag Mini transfers your drone's position and identification to our cloud. By displaying the real-time data in our app Dronetag enables advanced drone operations and coordination of manned and unmanned traffic in the same airspace. Direct (Broadcast) Remote Identification Your drone's info is transmitted via Bluetooth to up to 3 km (1.86 miles). With our Direct Remote ID, you fulfil all the new regulation necessities, and you are free to fly & touch the sky! Supported regions European Union ASD-STAN Compliant with prEN 4709-002 which requires Direct Remote Identification for drones above 250 grams flying below 120 meters in the Specific category. Mini is also capable of Network Remote ID, which will be mandatory for drone operations in so-called U-space. USA ASTM Dronetag Mini is Approved by FAA (check the DoC here) and Compliant with ASTM F3411 which requires Broadcast Remote ID for all pilots flying out of FAA-recognized identification areas. Worldwide compliance Mini is usable anywhere in the world with the Direct or Broadcast Remote ID via Bluetooth. The Network Remote ID functionality is fully dependent on the coverage of cellular networks. All countries using ASD-STAN or ASTM standards are supported. Check your local rules. Smallest and lightest Dronetag Mini is the smallest and lightest Remote ID device on the market With the half size of a muesli bar, the weight of 32 g (1.1 oz), it offers everything you need to fly safe & compliant. Independent, locked and with the longest battery life Mini is attachable to any drone with a strong reclosable dual lock fastener (you can lift average drone by it). The device has internal GNSS, LTE and Bluetooth antennas and offers up to 14 hours of battery life. Features Security at its best Soldered chip SIM, firmware over the air updates, or DTLS encryption got you safe & secured. Multi constellation GNSS receiver Receiving signals from GPS, GLONASS, Galileo and SBAS for robust and reliable positioning. Built according to the newest Remote ID standards Compliant with Direct & Network Remote ID according to the prEN 4709-002 and ASTM F3411 Standards. Internal LTE, Bluetooth and GNSS antennas With an option to add external LTE and Bluetooth antennas for better signal reception. Battery with up to 14 hours of endurance You can also use your drone as a power source for carefree flights without the need for charging. Take-off, landing and free-fall detection Worry-free flight start and end. Mini warns other closed-by pilots about potential dangers. Multiple sensors onboard GNSS position estimation, pressure altitude measurement and motion detection via accelerometer. MAVlink & DJI A3 support Professional DJI and Pixhawk flight controllers integration via our EXT port to get onboard data. Dronetag App Available on all devices Dronetag App allows you to manage your devices, check the airspace zones, plan your flights, inspect airborne drones & flight plans and notify you about any airspace hazards.
