This cast cover is completely watertight, keeping your bandages, prosthetics, and casts dry. It is the only leg and arm cast protection in the world with the patented vacuum seal to keep your bandage or cast dry. It is so completely and totally waterproof, between the waterproof fabric and the vacuum seal, that you can even dive off a diving board, ride the ocean waves, or scuba dive and still have your cast stay completely dry. Arm and Leg Cast Covers are designed to fit snugly, especially the opening at the end of the cast cover where the arm and leg cast covers must remain sealed. To create a good vacuum seal the opening for your specific cast cover needs to be smaller than your limb.Features: High Quality Surgical Rubber Great for casts, bandages or prosthetics Durable and Reusable Shower, Swim and Bathe with confidence Completely Waterproof Vacuum Seal Waterproof Vacuum Seal:DryPro securely fits over a cast, bandage or prosthesis Collapsed look and feel of the DryPro confirms that the vacuum is working and that the DryPro is completely waterproof DryPro uses simple physics-water cannot go in if the air(space) is already pumped outSafety & Function: Special non-skid grid increases traction in the shower or around the pool DryPro fits snugly against hand or foot so one can firmly grip on pool ladder or hold onto bar of soapEasy to Use: Slip on over the cast, bandage, prosthesis Squeeze and release the hand pump until it remains collapsed Remove the pump and push on the safety cap How to Measure: The most important measurement is always the circumference rather than the length. Measure around the skin and not around the cast. Arm: Measure from the tip of the middle finger to the top end of the cast or prosthetic. If the cast goes above the elbow, follow the bend of the arm. (Choose a DryPro Waterproof cast cover that is at least 2 inches LONGER than your measurement. Don’t worry if the DryPro cast cover is too long. The excess material of the cast sock will flatten down when the air is pumped out. Measure Opening: · Measure the circumference of the arm just above the cast or bandage. If the end of the cast is very close to the elbow, measure mid bicep. · Choose a DryPro waterproof cast cover that is at least 1 inch SMALLER than your measurement. To create a good vacuum seal the opening of the cast sock needs to be smaller than your limb Size Prod No. Length Opening Size Half-Arm, Small HA1300 17.5in(44.5cm) 7.75-10in(19-25.4cm) Half-Arm, Regular HA1500 20in(51cm) 10in +(25.4cm +) Full-Arm, X-Small FA1200 16in(40cm) 6-6.75in(15-17cm) Full-Arm, Small FA1400 23in(58cm) 6.75-8.75in(17-22cm) Full-Arm, Medium FA1600 28in(71cm) 8.75-10in(22-28cm) Full-Arm, Large FA1800 31.5in(80cm) 10in +(28cm +)
Related
Related
Related
Related