.product-info-tutorial{margin-bottom:20px;}.product-tutorial-img-container{width:20%;}.product-tutorial-img-container img{margin:0;}version="1.0" standalone="yes"? These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.The only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication. There's a great Arduino library for 1-Wire, but some microcontrollers do not have support for 1-Wire so be sure to check!We toss in a 4.7k resistor, which is required as a pullup from the DATA to VCC line when using the sensor. We don't have a detailed tutorial up yet but you can get started by using the Dallas Temperature Control Arduino library which requires also the OneWire Library. Technical Details Technical specs: Usable temperature range: -55 to 125°C (-67°F to +257°F) 9 to 12 bit selectable resolution Uses 1-Wire interface- requires only one digital pin for communication Unique 64 bit ID burned into chip Multiple sensors can share one pin ±0.5°C Accuracy from -10°C to +85°C Temperature-limit alarm system Query time is less than 750ms Usable with 3.0V to 5.5V power/data Downloads: DS18B20 Datasheet Learn Adafruit's Raspberry Pi Lesson 11. DS18B20 Temperature Sensing Measure temperature with your Raspberry Pi using the DS18B20 Large Pi-based Thermometer and Clock Build a large LED Thermometer / Clock using a Raspberry Pi Using DS18B20 Temperature Sensor with CircuitPython How to connect and use a DS18B20 one-wire temperature sensor with CircuitPython!
