DTF PRINTS READY TO PRESS HEAT TRANSFERS

Design Transfers DTF Verified independent store

→

DTF TRANSFERS PRINTS INFORMATION 1 METER GANGSHEET SIZE : 100 CM X 57 CM DO NOT MIRROR ARTWORK FILES ARTWORK FILE SHOULD BE TRANSPARENT (NO BACKGROUND) ARTWORK MUST BE HIGH RESOLUT ION 300DPI APPLICATION SURFACES It can be used on different materials, such as 100% cotton, 100% polyester, cotton/poly blends, tri-blends, canvas, Lycra®, spandex, elastane, Jeans, Leather, and more. PRESSING DETAILS 150°c for 10 seconds Medium pressure or 2PSI Warm peel CURING Curing is optional. If you do wish to cure the print, please put a Teflon or silicone sheet between the print and the heat plate. Press for 5 seconds. Carefully remove the sheet to reveal your repressed print HEAT PRESS / IRON INSTRUCTIONS Please note: DTF printing is best suited for use with heat presses (including small handheld presses). If using household iron, ensure you have turned off the steam. Turn iron to highest setting. Cover the garment with silicone or Teflon sheet, place the print and apply firm pressure. Move iron in a circular motion evenly over the print. This will take 20-25 seconds for larger prints. 10-15 seconds for A5 or smaller. Wait 10 seconds and carefully (slowly) peel the print off. If any edges do not come off easily apply some heat again and repeat WASHING INSTRUCTIONS • Wash at 30° or 40° cycle• Do NOT use harsh detergents• ⁠if possible avoid tumble drying, hang or lay flat to dry• ⁠do not iron on the print, turn garment inside out Show more