Dual Delay

M

muffwigglers.myshopify.com Verified independent store

→

The Dual Delay represents the next step in delay based effects from Modcan. We took the existing Digital Delay 59 from the A/B series and dramatically reworked both the hardware an d firmware model to add significant features and enhancements in the conversion to Euro format. View User Manual The most obviously apparent change was to make it a Dual with independent controls for each channel. We also added selectable modes for delay type. Choices are Re-sampling (pitch shifting effect when altering delay time) and a "Clean" mode for standard Digital Delay effects without pitch shifting. Low noise design using 48kHz sample rate, 32bit DSP processing and 16bit I/O. Other features include 0Hz-21K continuously variable 4 Pole Lowpass filter in the delay feedback path for "Analog BBD/Tape Delay" emulation. The filter has full range self oscillating resonance with voltage control of resonance amount and filter cutoff. Input signals can be routed as two mono delays or stereo or as a dual Tap delay with delays in series internally. Each channel can be either in clean or resample modes and can also be patched in series and parallel for external feedback path. Delay time can be set by panel control knob, CV, external sync pulse and tap tempo buttons. Also sync division is available to divide the pulse clock. Each delay has 3 ranges Resample Delay Ranges:Lo: 0.01s - 0.06sMid: 0.06s - 0.5sHi: 0.5s - 4s Clean Delay Ranges:Lo: 0.0006 - 0.02sMid: 0.02s - 0.91sHi: 0.91s - 5.46s All the functions (except input level) that are controlled by panel knobs have matching CV inputs allowing for a wide range of flexible control modulation. The module uses very low current requiring only 40mA for operation and will work with any power supply between 8 and 15V. Less current than many simple analogue modules. Features: Two independent mono delays 48kHz sample rate, 32bit DSP processing and 16bit I/O Built in 4 pole Lowpass filter with resonance and routing CV control over all major parameters Mono or stereo input/output Delay time in 3 ranges Tap and Sync tempo Sync tempo division Clipping and sync speed indicator LEDs Very low operating current 20HP wide approx. 1" deep Firmware by Eric Brombaugh Specs:Sample Rate 48kHz@16bitInput: 10V pk-pk@100KohmsOutput: 10V pk-pk @1KohmsInput CV 0-10V@100KohmsCurrent:40mA@+12V, 10mA@-12V Demo MP3s Resample Delay.mp3clean+filter.mp3Dual Tap.mp3Frequency Shifter Feedback.mp3ExtFbkPhaser.mp3Spacey.mp3Stereo+Filter.mp3 Show more