Model: D210PRetail Price: $550.00 Product Spotlight OpenVox D210P is the worldwide affordable dual port T1/E1/J1 card and delivers the great voice quality over telephony systems. It supports up to 60 voice calls or 4.096 Mbps of full?duplex data throughput over four T1, E1, or J1 lines Two T1/E1/J1 ports with PCI interface for high performance voice and data applications Up to 60 Simultaneous voice calls Overview The D210P supports E1, T1 and J1 environments. It is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipments and allows inexpensive T1 channel banks to connect with E1 circuits. D210P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported. D210P works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications. Target Applications Voice-over Internet Protocol (VoIP) Services Complex IVR Trees "Meet-Me" Bridge Conferencing Calling Card Platforms VoIP Gateways (support SIP, H.323, and IAX) Legacy PBX/IVR Services Voice/Data Router (replace expensive routers) PRI/Switch Compatibility - Network or CPE Technical Specifications TwoT1/E1/J1 ports with PCI interface for high performance voice and data applications Half-length PRI card RJ48 connector 32 bit 33MHz PCI and fully PCI 2.3 compliant 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec Autosense compatibility with 5 V and 3.3 V PCI busses Power: 2.3W Minimum, 3.5W Maximum at 3.3 V or 5 V. Operation temperature: 0°C to 50°C Storage temperature: -65°C to 125°C Dimension: 12.9cm*10.3cm*1.8cm Weight: 87g PRI Switch Compatibility EuroISDN (PRI or PRA) - Q.931/Q.921 Network or CPE AT&T 4ESS National ISDN 2 CAS Voice Modes DMS 100 Lucent 5E Operating Systems Linux (all versions, releases and distributions f rom 1.0 up) Minimum Hardware Requirement 800-Mhz Pentium III 128MB RAM Available PCI Slot RoHS compliantCertificates: CE and FCC Warranty: 1 Year Limited Manufacturer Warranty ..jeff..
