Curved bars like the Kabuki Duffalo Bar, Rogue Buffalo Bar, Titan Yukon Bar, and the many other variants have become an important tool of the serious squatter, but racking the bars is not quite right on racks and J-Cups designed for traditional straight bars. This simple tool will help you match the angle of your J-Cups to the mating angle of your bar, resulting in better contact and a more secure racking experience. This wedge should work on most J-Cup designs similar to the Rogue Monster/Monster Lite J-Cups and the Rogue Sandwich J-Cups. These allow for an adjustment range of approximately 8° to 18° from vertical in 2° increments. The Kabuki Duffalo bar requires approximately a 12° tilt. There are two variants: one for 3x3 racks, and one for 2x3 racks (like the Rogue Infinity series). If you have a stainless steel rack, check to see if it is magnetic. If it is not, these wedges will not work on your rack. Sold as a pair. To use: 1. Arrange your J-Cups so that the rack-keep part (the metal that wraps around the upright) is on the inside of your uprights (see pictures). 2. Slide the Duffalo Wedge underneath the inside of the rack-keep. The wedge is magnetic, so it should stay in place on the rack. 3. Slide the wedge up and down to adjust J-Cup to your desired angle.
