Dynamat 10425 Xtreme Hex Pak Sound Deadener One 457mm x 812mm Self-Adhesive Sheet 0.37sqm Coverage for Doors Floors Rear Decks Trunk and Roof The Dynamat 10425 Xtreme Hex Pak contains one 457mm x 812mm (18" x 32") piece of self-adhesive Dynamat Xtreme, giving 0.37sqm (4 sq ft) of coverage. Suited for targeted application on rear decks, doors, floors, trunk lids, trunk floors, roofs, and quarter panels where extra material is needed to complete or extend an installation. Product overview The Hex Pak is the go-to option when an installation needs a little extra Dynamat beyond what a larger kit provides, or when treating a single targeted area such as a floor pan section, a trunk floor, or a door cavity. One 457mm x 812mm sheet covers a useful area at a practical size for most targeted applications. Dynamat Xtreme deadens panel resonance and vibration across all standard vehicle surfaces including under-hood applications, reducing road noise and improving the acoustic environment for in-car audio. Self-adhesive backing requires no adhesive preparation. Features and benefits One 457mm x 812mm sheet: A practical single-sheet format for targeted or top-up sound deadening applications. 0.37sqm total coverage (4 sq ft). Self-adhesive application: Peel and press for direct application to the panel surface. Suited to rear decks, doors, floors, trunk lids, trunk floors, roofs, quarter panels, and under-hood surfaces. Improves speaker dynamic range: Deadened panels give speakers a more controlled acoustic environment. Reduces road noise and vibration. What's in the box 1 x Dynamat Xtreme sheet (457mm x 812mm / 18" x 32") Technical specs Specification Detail SKU 10425 Brand Dynamat Type Sound deadener sheet Sheets Per Pack 1 Sheet Size 457mm x 812mm (18" x 32") Total Coverage 0.37sqm (4.0 sq ft) Application Self-adhesive Frequently asked questions What is the Dynamat 10425 Hex Pak used for? The 10425 Hex Pak is a single-sheet sound deadener for targeted application on rear decks, doors, floors, trunk lids, trunk floors, roofs, quarter panels, and under-hood surfaces. It is useful when a full kit provides more than needed, or when topping up an existing installation. How much area does the 10425 cover? One sheet at 457mm x 812mm gives 0.37sqm (4 sq ft) of coverage, suited to treating a single door cavity, floor section, or trunk floor area. Can the 10425 be cut to size? Yes. Dynamat Xtreme can be cut with a sharp knife or scissors to fit irregular panel shapes. Dynamat recommends using a roller tool after application to ensure complete adhesive contact. Is the 10425 suitable for under-hood use? Yes. Dynamat Xtreme is suited to under-hood installations in addition to interior panel surfaces such as doors, floors, and roof sections. Does the 10425 require any additional adhesive? No. The sheet is self-adhesive, peel the backing and press firmly onto a clean, dry surface. A roller tool is recommended for best adhesion results.
