Dynamat 13100 DynaTape 38mm Wide Aluminium Finishing Tape 9.1m Roll Transparent Pressure-Sensitive Acrylic Adhesive Seals Dynamat Seams Secures Wiring Professional Finish The Dynamat 13100 DynaTape is a 38mm (1.5") wide aluminium tape on a 9.1m (30 ft) roll with a transparent pressure-sensitive acrylic peel-and-stick adhesive. Designed to seal seams between Dynamat sheets, fill gaps between body panels, and secure wiring routed through the vehicle interior for a clean, professional installation finish. Product overview A clean Dynamat installation depends on finishing the seams and edges properly. DynaTape seals the joins between sheets of Dynamat, closes gaps between body panels, and tacks down loose wiring to give the completed installation a neat, professional appearance. The aluminium tape reinforces noise damping at seam points and provides a uniform surface across the treated area. The transparent pressure-sensitive acrylic adhesive applies with firm hand pressure and releases cleanly from the liner for straightforward, no-mess application. At 38mm wide, DynaTape covers seams between adjacent sheets without excessive overhang, and the 9.1m roll length gives enough tape for a full vehicle installation. Features and benefits Seals seams between Dynamat sheets: Closes joins between adjacent sound deadener sheets for a uniform treated surface. Fills gaps between body panels: Covers exposed panel gaps for complete surface treatment. Secures wiring routed through the vehicle: Tacks wiring to the treated surface for a clean, professional installation. Transparent pressure-sensitive acrylic adhesive: Peel-and-stick application, no tools required. 38mm (1.5") width: Covers seams without excessive overhang. 9.1m (30 ft) roll: Sufficient for a full vehicle Dynamat installation. Silver aluminium tape. Technical specs Specification Detail SKU 13100 Brand Dynamat Type Aluminium finishing tape Product DynaTape Width 38mm (1.5") Roll Length 9.1m (30 ft) Colour Silver Adhesive Transparent pressure-sensitive acrylic Application Peel and stick Frequently asked questions What is DynaTape used for? DynaTape is used to seal seams between sheets of Dynamat sound deadener, fill gaps between body panels, and secure wiring routed through the vehicle interior. It gives the completed installation a professional finish and reinforces noise damping at seam points. Does DynaTape need to be used with Dynamat products? DynaTape is designed specifically for use with Dynamat installations but can be used on any non-visible metal surface inside the vehicle including floors, doors, and roofs. How wide is DynaTape and how long is the roll? DynaTape is 38mm (1.5") wide and comes on a 9.1m (30 ft) roll, providing enough tape for a full vehicle Dynamat installation. How does the adhesive on DynaTape work? DynaTape uses a transparent pressure-sensitive acrylic adhesive. Peel the liner from the back of the tape and press firmly onto the surface. No heat or additional tools are required. Can DynaTape be used to secure wiring? Yes. DynaTape can be pressed over wiring routed along treated surfaces inside the vehicle, tacking the wiring in place and giving the installation a tidy, professional appearance.
