Description Dynamometer with external measuring cell up to 100 kN / various alarm modes / graphic display / data logger / incl. software / incl. eyebolts The dynamometer can be used to measure both tensile and compressive forces with high accuracy. Tensile and compressive forces are often measured in the test laboratory. For example, to determine the yield point, the tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 100 kN. Various eyelets or hooks with an M33 thread can be attached to the measuring cells. It is also possible to attach your own devices to the measuring cell using these threads.The internal memory of 32 GB offers space for 30 million measuring points. This allows measurement logs to be created, saved and exported. The dynamometer has a USB-C interface that can be used to read the measurement data into the PC software. The dynamometer is equipped with a graphic LCD that displays the measured values both numerically and graphically. In addition, a bar chart shows the measured value in the selected measuring range. The measuring cell is protected to IP67 and can therefore also be used in harsh industrial environments. Various force test stands are available for adapting the dynamometer. A special feature of the dynamometer is the possibility to exchange the measuring cell between the models. By entering the sensitivity in mV/V, all measuring cells can be used with just one handheld device. Highlights - Measuring range: 0 ... 100 kN - Measuring rate: 1 ... 7200 Hz - Accuracy: ±0.05 % F.S. - Graphic display - USB-C interface - PC software - 32 GB memory for 30 mio. measuring points - Measuring cells can be easily changed - Various alarm modes - Bar chart for displaying the measured value in the measuring range - Calibration reminder Specification Force Measuring range 0 ... 100 kN Resolution 10 N Accuracy ± 0.05 % F.S. General technical data Units kPa, kg, g, ft, N, lb, t, kN, Pa, Nm, Ncm Display type LCD with illumination Display size 2.8 inch Adjustable measurement rate 1 ... 7200 Hz Memory medium Internal memory Storage capacity 32 GB Memory interval of 1 Hz Memory interval up to 7200 Hz Operating time 13 h Automatic switch-off adjustable 1 ... 15 min. Automatic switch-off can be deactivated Yes Alarm Optical, acoustic Alarm modes Inside, Outside, Crack, Switch off Protection class measuring cell IP67 Menu language German, English, French, Italian, Spanish, Dutch, Portuguese, Danish, Turkish, Polish, Russian, Chinese, Japanese Protection class (device) IP52 Power supply USB 5 V DC, 500 mA Weight 255 g Dimensions (L x W x H) 165 x 85 x 32 mm Operating conditions -20 ... 65 °C , 10 ... 95 % r.H Storage conditions -20 ... 65 °C , 10 ... 95 % r.H Delivery Scope 1 x dynamometer PCE-DFG 100K X 1 x load cell PCE-DFG 100K X load cell 1 x case 1 x USB-C cable 1 x PC software 1 x operating instructions Downloads Manual
