Got tired of fasteners loosening or breaking because of single shear/adapter type E36 lock kits? Tired of wheels wobbling and/or binding under huge steering angle? We got tired of it too! That is why we made a kit that does not have these common issues. We guarantee that with this kit, your car control will be as smooth as butter under any conditions: dry, wet, snow or ice! We have tested our products under all conditions! Some of Suboske Racing E36 Drift angle kit features : Up to 70 degrees of steering angle High strength steel control arms and knuckles Wider stance to achieve necessary clearance Roll center correction Bump steer correction Optimal Ackermann for drifting (4 positions) Adjustable steering stoppers Excellent steering steering control/feedback Quality bearings are used to ensure long lifetime This kit has everything you need to install : 2x Lower control arms 2x Knuckles 2x Outer tie rods 2x Top hats 2x Lower control arm bushing 4x Ackermann shims All bearings and hardware necessary for installation Installation/setup instruction For simplicity we use E82/E92 generation bolt-on type wheel bearings (P.N. 31216765157). We can supply the kits with or without these bearings, please choose appropriately, stock wheel bearings do not fit. Must use coilovers to run this kit. As with any other kit, depending on coilover brand/model, some modifications might be required to adapt top hats. To install this kit you will need : Front coilovers Stock inner tie rods Stock brakes Front sway bar will have to be removed *if necessary, can be adapted Minimum wheel size R17 Wider front fenders or overfenders are highly suggested (6cm wider per side with R17 ET20 8.5J wheels) Qualified mechanic Racing use only
