We are Australian Distributors of the infamous E3D-Online high performance full metal Hot Ends. e3D 3D printer Hot Ends are well regarded as one of the best full metal Hot Ends. The e3D Lite6 is a low cost alternative to the e3D V6. It offer the high performance and reliable performance the e3D is famous for but is restricted in the print speeds and temperature that it can print as. It has a partial PTFE lined Hot End so this means that there is a temperature limit of 240C. Lite6 is aimed at the more standard materials, such as ABS and PLA, and it really does produce beautiful looking prints with outstanding reliability. Bsuitable for printing the widest range of print materials with excellent print results, allowing for soft flexible materials but restricted from higher temperature filaments such as polycarbonate and some Lite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features. Lite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features. - See more at: http://e3d-online.com/Lite6-1.75mm-Bowden#sthash.F0NYakOB.dpuf Lite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features. - See more at: http://e3d-online.com/Lite6-1.75mm-Bowden#sthash.F0NYakOB.dpuf Lite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features. - See more at: http://e3d-online.com/Lite6-1.75mm-Bowden#sthash.F0NYakOB.dpuf ComparisonChart e3D V6 e3D Lite6 Max Temp >400 Degrees Celsius 245 Degrees Celsius Speed 20-100mm/s 20-50mm/s Compatibility Filament Diameter 1.75mm of 3mm 1.75mm Bowden Yes Yes Volcano Yes Yes V6 Nozzles Yes Yes Cross section through 3eD Lite6. Note that the PTFE tube runs further down the hot end compared to the e3D V6 Hot Ends displayed below. Cross sectional view through the three E3D V6 hot ends. Left 1.75mm Universal, middle 3mm Direct, right 3mm Bowden. What's in the box Embedded Bowden Coupling (Universal for Direct & Bowden)HeatSinkHeater Block1.75 x 0.4mm Nozzle (interchangeable)Heater CartridgeThermistor (Semitec 104GT2)Section of PTFEFanFan DuctAll the fixings and wiring you need Downloads Download CAD drawings of the e3D Lite6 -here- Download e3D Fan Duct CAD files -here- Links E3D-Lite6 Documentation -wiki- This above cutaways show the internals of all three HotEnds. Left to Right: 1.75mm Universal, 3mm Direct, 3mm Bowden. - See more at: https://e3d-online.com/E3D-v6/Full-Kit/v6-1.75mm-Universal-Bowden#sthash.cOCmL0t2.dpuf This above cutaways show the internals of all three HotEnds. Left to Right: 1.75mm Universal, 3mm Direct, 3mm Bowden. - See more at: https://e3d-online.com/E3D-v6/Full-Kit/v6-1.75mm-Universal-Bowden#sthash.cOCmL0t2.dpuf
Related
Related
Related
Related