Discontinued, if you are in need please drop us an email. Please note you only need 1 ToolChanger ToolHead. The ToolChanger ToolHead mounts directly to The E3D Motion System. It includes all the hardware required to pick up and drop off tools. The ToolChanger ToolHead contains the mechanical components of the Kinematic tool changing system. Featuring a high-performance Stepper Motor with an integral reduction gearbox, hardened contact surfaces, and all capable of performing over 1.5 million tool changes. It has been designed to bolt directly to E3D's Motion System’s X-Carriage. Please note that if you are fitting the ToolHead to a machine other than the E3D Motion System you will need to develop your own mounting solution. This will require you to provide components including but not limited to the items listed in the "Parts you will need if not mounting to an E3D Motion System" section below. We are proud to be aUS distributor for E3D. What's in the box: Assembled Face Plate Rear Plate Stepper Motor 1 x Radial Bearing 1 x Flange Bearing 1 x Thrust Bearing 1 x Endstop Switch 1 x Fixings Kit Parts you will need if not mounting to an E3D Motion System: X-block (something like this, but for your printer) Standoff and spacers, for between the Assembled Face Plate and the Rear Plate Belt retainers/mounts A new shaft, if your mounting approach results in a distance exceeding 28mm between the Assembled Face Plate and Rear Plate Documentation: ToolChanger Motion System GitHub - Motion System GitHub - ToolChanger
