We have tried every single setting to guarantee the best possible steering control and feedback for E8X/E9X chassis. Years of experience racing these chassis. Buttery smooth & easy control. No steering wobbles, binds or shakes - all combined with huge steering angle. With this kit, you no longer need to use or modify your original knuckle - assembly is much easier. Fits all E81/E82/E87/E88 1 series, E90/E91/E92/E93 3 series BMW's - NON M BRAKES Some of Suboske Racing E8X/E9X Drift angle kit features : Up to 72 degrees of steering angle High strength steel control arms, knuckles and tie rod ends Wider stance to achieve necessary clearance Roll center correction Bump steer correction Optimal Ackermann for drifting (4 settings) Adjustable steering stoppers Excellent steering control/feedback Quality bearings are used to ensure long lifetime Easily adjustable caster This kit has everything you need to install : 2x Lower control arms 2x Knuckles 2x Outer tie rods 2x Top mounts 4x Ackermann shims All bearings and hardware necessary for installation Installation/setup instruction Coilovers are suggested to run with this kit. Please let us know what coilover brand you plan to use - we can help you to spec out appropriate top mounts! To install this kit you will need : Stock inner tie rods Stock brakes (non-M) Stock wheel bearings Stock front sway bar will have to be removed Minimum wheel size R17 Chassis seam behind the wheel (inner wheel well) is suggested to be flattened for clearance (no cutting required) Wider front fenders or overfenders. +65mm for E8X, +50mm for E9X (these values are for 235/40R18 ET20 9J, please use fitment calculator for different wheel/tire combos) Coilovers *suggested Qualified mechanic RACE USE ONLY
