Eagle Access Control Limit Switch For Eagle Operators | EAC-E-097 The Eagle Access E-097 is a replacement control limit switch designed specifically for Eagle gate operators. This critical component is responsible for communicating the precise open and closed positions of the gate to the control board, ensuring safe and accurate operation during every cycle. Snap-Action Precision for Eagle 1000 and 2000 Series Gate Operators The Eagle E-097 is the dedicated OEM limit switch for Eagle slide and swing gate operators, replacing the discontinued E-103 with improved spring mechanics and reinforced contact plating. Its snap-action mechanism is calibrated to Eagle's E-108 cams, eliminating the "contact bounce" that causes erratic stops and false reversals in generic switches. It fits directly into the E-106 Limit Switch Assembly for slide gates (Eagle 1000/2000) and mounts to the chassis of swing operators (Eagle 100/200). Spade terminals connect to the E-031 Motor Harness with no soldering required. For complete gate logic overhauls, pair the E-097 with the EMX MVP D-TEK Loop Detector for vehicle detection and the AES e-Loop Mini (EL00M-K) for wireless exit sensing. Direct Drop-In OEM Replacement for E-103 Limit Switches The E-097's temperature-stable spring response prevents the "soft" actuation common with generic switches, where gates drift an inch or two depending on the weather. Pro Tip: When installing into the E-106 assembly, always ensure the Locking Plate is fully disengaged before rotating the cams. Forcing cams against a new switch without releasing the plate is the #1 cause of stripped adjustment shafts. Browse all Gate Openers and Operators for compatible equipment.
