Transport your FAT Electric Trike With Easy Load Built for the larger, heavier and fat tire trikes as well as larger, longer hand cycles checkout the Easy Load Tray Systems: ELT-XL and ELT-XL3R . The ELT-XL function is the same as the Easy Load Tray (ELT). It is the same 13 pieces except the Center Tube, Receiver Hitch Insert and wheel chocks are made of steel. The center tube made of steel increases the ELT-XL weight to ~62 pounds. The remaining 10 pieces are aluminum. Unlike the ELT the Wheel Channels and Ramps are ~5” wide to accommodate fat tires and the extreme wheel camber of some hand cycles. The ELT-XL rotates to vertical on a 1/2” clevis pin but the safety clevis pin remains a 3/8 vis pin. The safety pin arrangement is different from the ELT as it penetrates the center tube rather than fitting across the upper or lower surface of the tube. Basic usable space to carry a trike is ~40.5” front to back and the Wheel channels remain 63” long. Wheel Channels may be manipulated the same as the ELT to increase Left to Right width. Easy Load Tray XL Specifications: Designed to work with a 2” receiver hitch Trike transporting vehicles' 2” receiver hitch must have a ground clearance of 16” Trike transporting vehicles without ground clearance of 16”: A riser is required, and the Riser must have a second Hitch Tite to secure it from moving Powered: Connects brake lights and turn signals Power to lights is supplied through either a flat four-pin or a round seven-blade connector. Weight: Lightweight and easy to handle at approximately 62 pounds (10 out of 13 pieces are aluminum). 2” Receiver Hitch Insert, Wheel Chocks, and Center Tube are made from steel Usable space: Carries a trike that is approximately 40.5” front to back, and Wheel Channels are 63” long. Wheel channels may be manipulated to increase left to right width Rotation: ELT-XL rotates to vertical on a 1/2” clevis pin but the safety pin remains a 3/8” clevis pin. The safety pin arrangement is a bit different than the ELT as it penetrates the Center Tube rather than fitting across the upper or lower surface of the tube. Safety features: Include a 3/8” Clevis Pin and a gravity lock when rotated to vertical. Loading side: Trike can be loaded from either side Ramp: Approximately 5" wide Wheel channels: 63" Max payload: 150 lbs Easy Load Tray (ELT-XL3R) Specifications: FAT Trikes: Specifically built for larger, heavier, and fat tire trikes, as well as larger, longer hand cycles. Compatible with AddMotor M360 Usable space: Carries a trike or hand cycle that is approximately 40.5” front to back, and Wheel Channels are 63” L to R. Functionality: Same as ELT XL, plus third ramp with 13 pieces (Center Tube, Receiver Hitch Insert, and Wheel Chocks made of steel) Center Tube made of steel increases weight to approximately 62 pounds. Wheel Channels and Ramps are approximately 5” wide to accommodate fat tires and extreme wheel camber Rotation: Rotates to vertical on a 1/2” clevis pin with a 3/8” clevis pin safety arrangement Usable space: Supports a trike is approximately 40.5” front to back, and Wheel Channels remain 63” long Wheel Channels: Can be manipulated to increase left to right width Max payload: 150lbs Note: This item is not suitable for use with large motor homes due to the distance from the rear axle to the vehicle receiver hitch box.
