PD220-D Pool Dehumidifier for Larger Indoor Pools The Ebac PD220-D handles the moisture load of larger indoor pools and spa halls, removing 190 pints a day and peaking near 220 in warm, humid conditions. It recovers about 15,500 BTU back into the room, so the energy used to dry the air is not lost to the outside. PD220-D 10157GY-US Capacity and Control 15,500 BTU heat recovery returns process heat to the hall, easing the demand on space heating 190 pints per day, 220 peak covers the evaporation from a larger water surface and busier bather load R32 refrigerant aligns the unit with current low-GWP standards for long-term serviceability Two-speed centrifugal fan to 665 CFM directs dry air across glazing and water where condensation starts Status indicators and diagnostics menu show operating state so facility staff can spot a fault early Remote touch control interface sits clear of the corrosive pool atmosphere for safer, simpler adjustment PD220-D Applications and Environments The PD220-D suits commercial pool halls, hotel leisure suites, school and club pools, and large spa enclosures. The unit can run freestanding or be ducted from a plant room into the pool space. Managing humidity at this scale protects the building envelope, keeps glazing clear for sightlines, and holds conditions in the comfort band swimmers and staff expect. Specifications Typical Extraction 190 PPD (220 at 80°F/80% RH) Effective Volume 21,189 cu ft (450 m³) Airflow (Low / High) 586 / 665 CFM Power Supply 220V / 1-Phase / 60Hz Power Consumption 2,100 W Current 10 A Refrigerant R32 Heat Recovery 15,500 BTU Fan Centrifugal, 2-speed Operating Temp Range 33°F – 95°F Noise 73 dBA Dimensions (H×W×D) 17.5 × 27.5 × 26 in Weight 168 lbs Documents PD220-D Owner's Manual (PDF) PD220-D Specification Sheet (PDF) PD220-D Spare Parts List (PDF) PD220-D Wiring Diagram (PDF) PD220-D Wiring Schematic (PDF)
