Description TinyJohn Vent Kit | Standard, Side Vent & Ceiling Options for Incinerator Toilets Product Description The TinyJohn Vent Kit is the purpose-built venting solution for EcoJohn's TinyJohn waterless incinerating toilet. Proper venting is required for all TinyJohn installations — it safely exhausts the incineration process to the outside, keeping the interior space clean and odor-free. Available in three configurations to fit the most common installation types — standard wall vent, side vent, and ceiling vent — so you can choose the routing that best suits your cabin, RV, van conversion, tiny house, or off-grid structure. EcoJohn's support team is available to help guide you through the right kit selection and installation process. Required accessory for all TinyJohn incinerator toilet installations Available in standard, side vent, and ceiling configurations to fit your specific setup Compatible with TinyJohn gas and electric models Designed to safely exhaust incineration byproducts to the outside Supports multiple routing options: through the wall and up, through the wall with a horizontal rain cap, or through the ceiling Backed by EcoJohn's dedicated installation support team FAQs Q: Is a vent kit required for the TinyJohn? A: Yes. The TinyJohn requires a vent for exhaust. The vent safely directs incineration byproducts outside the structure. The vent pipe may be warm to the touch during operation, but will not cause burns. Q: What are the venting route options for the TinyJohn? A: The vent exits from the back of the unit. From there it can be routed through the wall and up along the outside, through the wall with a horizontal rain cap, or straight out through the ceiling. The horizontal cap option is popular for RV and van conversion installations. Q: Which vent kit configuration should I choose? A: The right configuration depends on your installation space and structure type. Standard and side vent kits are wall-exit options, while the ceiling kit routes exhaust upward through the roof. EcoJohn's support team can help you determine the correct choice for your specific setup. Q: What clearance is recommended around the vent pipe? A: EcoJohn recommends 2 inches of clearance from the wall for the vent pipe. Q: Is the vent kit compatible with both gas and electric TinyJohn models? A: Yes. The vent kit is used with all TinyJohn models regardless of fuel type, as all models require external exhaust venting. Variant Specs Variant Description Standard Standard wall vent configuration Side Vent Side wall vent configuration Ceiling Ceiling vent configuration Standard: 4 x 12" L Steel Vent Pipe2 x Wall Collar1 x T Pipe 1 x T Pipe Cap1 x Rain Cap1 x Wall Strap Ceiling: 3 x 12" L Steel Vent Pipe1 x Flashing1 x Wall Collar1 x 90 Degree Elbow Pipe1 x RV Rain Cap1 x Wall Strap Side Vent: 1 x 12" L Steel Vent Pipe1 x Horizontal Cap1 x Wall thimble2 x Hose Clamp
