Ecosoft RObust 3000MAX reverse osmosis filter is a high-performance water purification system designed for both commercial and residential use. It efficiently supplies purified water to various applications, including ice makers, steamers, ovens, dishwashers, and dispensers. This system is particularly popular in restaurants, water production facilities, small breweries, car washes, and private homes, ensuring that users have access to clean and safe drinking water. Key Features of RObust 3000MAX Reverse Osmosis Filter Flow rate 150 liters per hour Made to run 20 hours per day Recovery rate 60% - filter is economical and environmentally-friendly Equipped with advanced pre-filtration to treat challenging waters Built-in pressure gauges indicating pump conditions CE marked and confirmed to be safe by EC New Approach Directives Operates on a direct-flow system, meaning it does not require a separate water storage tank. It provides purified water on demand, which is ideal for high-use environments. How to Install and Maintain the unit Installing RObust 3000MAX is straightforward, and it can be done by following these steps: Prepare the installation area: Ensure you have adequate space and access to plumbing connections. Assemble the components: The system comes with all necessary components, including pre-filters, reverse osmosis membranes, drain saddle, installation fittings, and tubes. Connect the system: Follow the provided instructions to connect the filter to your water supply, ensuring all fittings are secure to prevent leaks. Flush the system: After installation, flush the system to remove any trapped air and loose particles from the filters. Parameters Flow capacity 150-160 L/h Water consumption 250–300 L/h Waste water 100-140 L/h Inlet water pressure 2..5 bar Electrical requirement 180-240V, 50-60 Hz Power consumption 0.12kW Technical Specification System components Assembled filter Pre–filters Reverse osmosis membranes Drain saddle Installation fitting set Set of tubes Service wrenches Specifications Flow capacity — 150–1601 L/h Inlet pressure — 2–52 bar Water consumption — 250–300 L/h Waste water — 100–140 L/h Inlet water temperature — +4… +303 °С Room temperature — +5…+403 °С Power supply — 180-240 V, 50-60 Hz 1 At feed water TDS of 250 ppm and temperature of feed water of 25 °С, ±10%. 2 If pressure of water in your system does not meet requirement, install a pressure booster pump to raise it. If water pressure exceeds the upper limit, install a pressure regulator before the RObust. 3 Using the RObust with feed water temperature between +20 and +30 °С produces a lower rejection rate and higher flow rate, which yields higher TDS of purified water. Using the system with feed water above +30 °С is advised against. Feed water requirements pH = 6.5–8.5 TDS ≤ 1500 mg/L Hardness ≤ 10 meq/L (
