The ED-ACCHMI-Front is a panel-mounting accessory kit that secures EDATEC ED-HMI series devices into a cutout from the front. The kit includes four buckles and two lengths of M4 screws to accommodate both 7-inch and 10.1-inch HMI models. For specific installation steps, refer to the User Manual of the HMI product being installed. Key Features Compatible devices: EDATEC ED-HMI series products (7-inch and 10.1-inch) Purpose: Front panel mounting of ED-HMI devices into a cutout Buckles: 4x buckles for secure panel clamping Screws: 4x M4×10 screws and 4x M4×16 screws to suit different mounting depths Complete kit: All hardware needed for front installation in one package Specifications Category Details Compatible Devices EDATEC ED-HMI series (7-inch and 10.1-inch models) Buckles M4 threaded through-hole, qty 4 Short screws M4×10 (qty 4) Long screws M4×16 (qty 4) Installation Notes The installation schematic in the datasheet shows the hardware layout for 7-inch and 10.1-inch HMI models. For step-by-step instructions, refer to the User Manual of the specific HMI product being installed. Insert the HMI device into the panel cutout from the front. Attach the four buckles to the rear of the HMI device, aligning them with the mounting slots. Insert the appropriate M4 screws through the buckles and tighten to clamp the device against the panel. Note: The ED-HMI device and panel are not included. See the datasheet for buckle dimensions and installation schematic. Ordering Information Model Description ED-ACCHMI-Front HMI front-mounting kit: 4x buckles, 4x M4×10 screws, 4x M4×16 screws What's in the Box 4x buckles 4x M4×10 screws 4x M4×16 screws Technical Documents DataSheet MCCI and MCCI Catena are registered trademarks of MCCI Corporation. All other trademarks are the property of their respective owners.
