EDATEC Industrial Computer Based on Raspberry Pi CM5 ED-IPC3632

MCCI Verified independent store

→

This listing is for the ED-IPC3632: CM5-based industrial computer with 4x isolated serial ports (2x RS485 + 2x RS232), 2x isolated CAN 2.0B, 8x isolated DI, 8x isolated DO, dual Et hernet, optional Wi-Fi/Bluetooth and 4G LTE. Contact us if you need a different RAM, storage, 4G region, or serial port configuration. The ED-IPC3632 is EDATEC's most I/O-rich industrial computer, built on the Raspberry Pi Compute Module 5 and powered by the Broadcom BCM2712 quad-core Arm Cortex-A76 processor at 2.4GHz -- the same architecture as the Raspberry Pi 5. Designed for demanding industrial automation, robotics, data acquisition, and smart manufacturing applications, it combines a powerful CM5 compute core with an extensive suite of industrial interfaces -- including 4 isolated RS232/RS485 ports, 2 isolated CAN bus ports, 8 isolated digital inputs, 8 isolated digital outputs, dual Ethernet, optional Wi-Fi, Bluetooth, and 4G LTE. With optional CODESYS Control support, a wide 9V--36V DC power input, and a fanless metal enclosure rated for -25°C to 60°C, the ED-IPC3630 Series is engineered for real-world industrial edge control deployments. Key Features Processor: Broadcom BCM2712, quad-core Arm Cortex-A76 (ARMv8) 64-bit @ 2.4GHz Memory: 2GB, 4GB, 8GB, or 16GB LPDDR4-4267 SDRAM Storage: 16GB, 32GB, or 64GB eMMC; Micro SD card slot (user expansion); M.2 NVMe SSD (128GB / 256GB / 512GB optional) Display: 1x HDMI Type-A (HDMI 2.0), supports 4K @ 60Hz Networking: 1x Gigabit Ethernet (10/100/1000M) + 1x 100M Ethernet (10/100M) Serial Ports: 4x isolated RS232/RS485 with electrostatic and surge protection (configuration varies by model) CAN Bus: 2x isolated CAN 2.0B ports, 3KV isolation, 10--1000 kbps baud rate, with LED indicators Digital Inputs: 8x isolated DI (5KV isolation), supports AC input, NPN/PNP wet contact and dry contact, with LED indicators Digital Outputs: 8x isolated DO (5KV isolation), NPN type, 5--36VDC output, max 1.5A per channel, with LED indicators and overcurrent protection USB: 2x USB 2.0 (Type-A, 480Mbps) Wireless (Optional): 2.4GHz & 5GHz dual-band Wi-Fi (802.11 a/b/g/n/ac) + Bluetooth 5.0 4G LTE (Optional): Mini PCIe 4G module with Nano SIM card slot; supports GNSS on most modules CODESYS (Optional): CODESYS Control for Raspberry Pi MC SL support Power Input: Wide-range 9V--36V DC with reverse polarity, overvoltage, and overcurrent protection Reliability: RTC with optional 1F SuperCAP backup, Watchdog (hardware reserved), EEPROM (4K), hardware crypto authentication, Buzzer Cooling: Fanless passive cooling via high-quality metal enclosure Installation: DIN rail mounting Operating Temperature: -25°C to 60°C Certifications: FCC, CE OS Support: Raspberry Pi OS 64-bit (Desktop & Lite) Model Variants - Serial Port Configurations All models share the same CM5 platform, dual Ethernet, USB, HDMI, CAN bus, DI/DO, and power input. Serial port configuration is the only difference between variants. Contact us to order other configurations. Model RS485 Ports RS232 Ports Notable Extras ED-IPC3632 (this page) 2x RS485 2x RS232 - ED-IPC3633 3x RS485 1x RS232 - ED-IPC3634 4x RS485 None - SKU Configuration Guide The ED-IPC3632 ordering code breaks down as follows. This table is provided for reference when discussing other configurations with us. Field Options Model 3632 (2x RS485 + 2x RS232) | 3633 (3x RS485 + 1x RS232) | 3634 (4x RS485) Wi-Fi & Bluetooth 0 = without | 1 = with RAM 02 = 2GB | 04 = 4GB | 08 = 8GB | 16 = 16GB eMMC 16 = 16GB | 32 = 32GB | 64 = 64GB 4G Module blank = none | 4CN = EC20-CE (China/India) | 4US = EC25-AFX (North America + GNSS) | 4EU = EC25-EUX (Europe/MEA/Thailand + GNSS) | 4AU = EC25-AUX (Latin America/AU/NZ + GNSS) | 4EF = EC25-EFA (Europe/MEA/SE Asia + GNSS) Super Capacitor blank = without | S = with Specifications Category Details CPU Broadcom BCM2712, quad-core Arm Cortex-A76 (ARMv8) 64-bit @ 2.4GHz VPU H.265 (HEVC) up to 4Kp60 decode GPU OpenGL ES 3.1 & Vulkan 1.2 Memory 2GB / 4GB / 8GB / 16GB LPDDR4-4267 SDRAM eMMC Storage 16GB / 32GB / 64GB eMMC SD Card 1x Micro SD card slot (user data expansion) M.2 NVMe SSD M.2 B Key (2230 / 2242); 128GB / 256GB / 512GB options HDMI 1x HDMI Type-A, HDMI 2.0, 4K @ 60Hz Gigabit Ethernet 1x 10/100/1000M, RJ45 100M Ethernet 1x 10/100M, RJ45 USB 2.0 2x USB 2.0, Type-A (up to 480Mbps each) RS232/RS485 4x isolated ports via 12-pin 3.5mm Phoenix terminals with electrostatic & surge protection (configuration varies by model); RS485 signals: IGND/A/B; RS232 signals: IGND/TX/RX CAN Bus 2x CAN 2.0B, 6-pin 3.5mm Phoenix terminals; 3KV isolation; 10--1000 kbps baud rate; signals: CANH/CANL/GND Digital Input (DI) 8x isolated DI, 10-pin 3.5mm Phoenix terminals; 5KV isolation; NPN/PNP wet contact & dry contact; ON: 5--30VDC or -30 to -5VDC; OFF: 0--2VDC; grouped by 4 with shared COM Digital Output (DO) 8x isolated DO, 10-pin 3.5mm Phoenix terminals; NPN type; 5KV isolation; 5--36VDC output (24V recommended); max 1.5A per channel; overcurrent protection SIM Card 1x Nano SIM card slot (for 4G) eMMC Flash Port 1x Micro USB (for eMMC flashing) Wi-Fi (Optional) 2.4GHz (802.11 b/g/n) + 5GHz (802.11 a/n/ac), external SMA antenna Bluetooth (Optional) Bluetooth 5.0 (2402MHz ~ 2480MHz), external SMA antenna 4G LTE (Optional) Mini PCIe 4G module, Nano SIM slot, external SMA antenna (CN / NA / AU / EU / SEA variants) CODESYS (Optional) CODESYS Control for Raspberry Pi MC SL Power Input 9V--36V DC, 2-pin 3.5mm Phoenix terminal (VIN+/GND); reverse polarity, overvoltage & overcurrent protection Power Consumption 24W (max) RTC RTC with optional 1F SuperCAP backup; CR1220 battery base also available separately Watchdog Hardware reserved (software support in development) EEPROM 4K byte onboard storage Crypto Authentication Onboard hardware security element Buzzer Configurable for alerts and alarms Reset Hardware reset button Indicators PWR (red power), 4G (green), ACT (green system activity), USER (green, user-configurable), COM1--COM4 (green, one per serial port), CANB0--CANB1 (green, one per CAN port), X0--X7 (green, one per DI port), Y0--Y7 (green, one per DO port) Cooling Fanless passive cooling, high-quality metal enclosure Dimensions 143 x 100 x 55mm (W x D x H, DIN-rail bracket & antenna not included) Weight 1kg Installation DIN rail (bracket included) Operating Temperature -25°C to 60°C Storage Temperature -25°C to 60°C Humidity 5% ~ 95% (non-condensing) Certifications FCC (47 CFR Part 15 Subpart B), CE (EN IEC 62368-1:2024 + A11:2024, EN IEC 62311:2020, ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-3 V2.3.2, ETSI EN 301 489-17 V3.3.1, ETSI EN 301 489-52 V1.2.1, EN 55032:2015 + A1:2020 + A11:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019 + A1:2021 + A2:2024, EN 61000-3-3:2013 + A1:2019 + A2:2021, ETSI EN 300 328 V2.2.2, ETSI EN 301 893 V2.2.1, ETSI EN 300 440 V2.2.1, ETSI EN 301 908-1 V15.2.1, ETSI EN 301 908-13 V13.2.1) Operating System Raspberry Pi OS 64-bit (Desktop & Lite) 4G LTE Module Options Not included by default. Provided for reference if you need a 4G-enabled configuration -- contact us. Module Region Supported Bands GNSS EC20-CE China / India LTE FDD: B1/B3; LTE TDD: B38/B39/B40/B41; TD-SCDMA: B34/B39; WCDMA: B1; CDMA 1x/EVDO: BC0; GSM: 900/1800 MHz Optional EC25-AFX North America LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71; LTE TDD; WCDMA: B2/B4/B5; GSM/EDGE GPS/GLONASS/BDS/Galileo/QZSS EC25-AUX Latin America / Australia / New Zealand LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28; LTE TDD: B40; WCDMA: B1/B2/B4/B5/B8; GSM/EDGE: B2/B3/B5/B8 GPS/GLONASS/BDS/Galileo/QZSS EC25-EUX Europe / Middle East / Africa / Thailand LTE FDD: B1/B3/B7/B8/B20/B28A; LTE TDD: B38/B40/B41; WCDMA: B1/B8; GSM/EDGE: B3/B8 GPS/GLONASS/BDS/Galileo/QZSS EC25-EFA Europe / Middle East / Africa / South-East Asia LTE FDD: B1/B3/B7/B8/B20/B28; LTE TDD: B38/B40/B41; WCDMA: B1/B5/B8; GSM/EDGE: B3/B8 GPS/GLONASS/BDS/Galileo/QZSS Optional Accessories Power Adapters: Model Description ED-PSU1202-US-3.5PL 100~240VAC to 12VDC/2A Adapter, US plug, 3.5mm pitch Phoenix plug with lock ED-PSU1202-EU-3.5PL 100~240VAC to 12VDC/2A Adapter, EU plug, 3.5mm pitch Phoenix plug with lock ED-PSU1202-UK-3.5PL 100~240VAC to 12VDC/2A Adapter, UK plug, 3.5mm pitch Phoenix plug with lock ED-PSU1202-AU-3.5PL 100~240VAC to 12VDC/2A Adapter, AU plug, 3.5mm pitch Phoenix plug with lock Note: Each adapter model includes only one plug type. Power adapter sold separately. What's in the Box 1x ED-IPC3632 unit (with DIN rail bracket) 1x 2.4GHz/5GHz Wi-Fi/BT antenna (optional Wi-Fi/BT version) 1x 4G/LTE antenna (optional 4G version) Technical Documents DataSheet User Manual HDMI is a trademark or registered trademark of HDMI Licensing Administrator, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Wi-Fi is a registered trademark of Wi-Fi Alliance. USB-C is a registered trademark of USB Implementers Forum. MCCI and MCCI Catena are registered trademarks of MCCI Corporation. All other trademarks are the property of their respective owners. Show more