Compatible cases: Open Aluminium Case and Aluminium CNC Box. This listing is for the ED-Pi5Case-HA: HAT mounting accessory kit for EDATEC Pi 5 cases, available in Black (ED-Pi5Case-HA-B) and Silver (ED-Pi5Case-HA-S). Contact us if you need help choosing. The ED-Pi5Case-HA is a dedicated accessory kit that enables the installation of HAT (Hardware Attached on Top) expansion modules onto EDATEC's ED-Pi5Case-O (open frame) and ED-Pi5Case-B (box) Raspberry Pi 5 enclosures. The kit includes a Raspberry Pi 40-Pin GPIO long-pin expansion header for reliable connection to the Raspberry Pi 5's GPIO pins, plus the mounting hardware needed to securely attach the HAT to the case. Available with silver or black hardware to match the colour of your case. Key Features Compatible Cases: ED-Pi5Case-O (Silver and Black) and ED-Pi5Case-B (Silver and Black) Purpose: Enables HAT expansion module installation on EDATEC Pi 5 enclosures 40-Pin Connector: Raspberry Pi 40-Pin GPIO long-pin expansion header for secure GPIO connection between the Raspberry Pi 5 and HAT module Mounting Hardware: 4x M2.5×8+11 studs and 4x M2.5×5 screws for stable HAT attachment Colour Options: Silver (ED-Pi5Case-HA-S) or Black (ED-Pi5Case-HA-B) hardware to match your case Complete Kit: Everything needed for HAT installation included in one package SKU Configuration Guide The ED-Pi5Case-HA ordering code breaks down as follows. Field Options Model Pi5Case-HA (HAT accessory) Colour B = Black (ED-Pi5Case-HA-B) | S = Silver (ED-Pi5Case-HA-S) Specifications Category Details Compatible Cases ED-Pi5Case-OB, ED-Pi5Case-OS, ED-Pi5Case-BB, ED-Pi5Case-BS 40-Pin Connector Raspberry Pi 40-Pin GPIO long-pin expansion header; 2.54mm pitch Studs M2.5×8+11 (M2.5 external thread, 8mm length + M2.5 internal thread, 11.5mm total) Screws M2.5×5 (effective tooth depth 5mm) Colour Options Black (ED-Pi5Case-HA-B) | Silver (ED-Pi5Case-HA-S) Installation Notes The following notes apply to both ED-Pi5Case-O and ED-Pi5Case-B installations. A 1.5mm allen key is required but not included — it is supplied with your EDATEC case. If the case is already assembled with the Raspberry Pi 5, remove the existing case mounting screws before starting. Place the Raspberry Pi 5 on the bottom cover, aligning the mounting holes with the screw holes on the bottom cover. Pass the PCIe cable from the HAT module through the pre-drilled hole in the top cover before placing the top cover down over the Raspberry Pi 5. Place the top cover down over the Raspberry Pi 5 and align the screw holes. Insert four M2.5×8+11 studs into the screw holes on the top cover and tighten clockwise by hand. Connect the 40-Pin connector to the Raspberry Pi 5 GPIO header. Connect the HAT module to the Raspberry Pi 5 via the 40-Pin connector and align the HAT screw holes with the four studs. Insert four M2.5×5 screws into the HAT screw holes and tighten clockwise using the allen key to secure the HAT to the case. Compatible Cases Case Model Description ED-Pi5Case-OB Open Frame Aluminium CNC Case for Raspberry Pi 5 — Black ED-Pi5Case-OS Open Frame Aluminium CNC Case for Raspberry Pi 5 — Silver ED-Pi5Case-BB Passive Cooling Aluminium CNC Box for Raspberry Pi 5 — Black ED-Pi5Case-BS Passive Cooling Aluminium CNC Box for Raspberry Pi 5 — Silver Note: Raspberry Pi 5, HAT module, case, and 1.5mm allen key are not included in this kit. The allen key is supplied with compatible EDATEC cases. What's in the Box 1x 40-Pin GPIO long-pin expansion connector 4x M2.5×8+11 studs (colour matches selected variant) 4x M2.5×5 screws (colour matches selected variant) Technical Documents Datasheet MCCI and MCCI Catena are registered trademarks of MCCI Corporation. All other trademarks are the property of their respective owners.
