This highly colorful, whimsical birdhouse is sure to get lots of attention wherever you display it! Hang this unique project from a tree limb using wire and an eye screw or mount on a fence or tree trunk using our Flush Mount Hangers (available below). The bottom is hinged for easy clean out when nesting season is over. This fun project is easy to make from our full-size pattern and step-by-step instructions. Uses two brass plated hinges (#BHNG1) available below. (20" tall)More InfoDimensions: 19-7/8" tall x 20-3/16" wide Wood: One 1X10 x 96" long pine board Tools: Table Saw and Band Saw or Scroll Saw with a smooth non-chipping blade Electric Drill and 1-1/2", 3/16" and 3/32" dia. drill bits Hardware: Nails - One box, 3D 1-1/4" long, finish Screws - Eight #8 x 1-1/2" long, flat head Hinges - Two 1" x 1-1/16" brass plated (#BHNG1) Eyescrews (optional) - One 5/16" I.D. (#EYE3) for hanging Flush Mount Hanger (optional) - One 1-3/4" x 1-1/2" (#FMH) Supplies:Transfer paper (#CARB), pencil & clear tape Sand paper - medium & fine grits Wood filler - non-shrinking, fast drying for wood flaws Paint Brushes - 3/4", 1/4" and 2" wide brushes or foam tip Paint:White primer (#PRIMQT) for a base coat and the following suggested colors of acrylic paint or exterior semi-gloss enamel: 2023 - Brown Iron 2030 - Burnt Sienna 2078 - Straw 2505 - White 2506 - Black 2459 - Crocus Yellow Sealer: High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
