Specialty Clean™ EF Efflorescence is a product which acts quickly to dissolve efflorescence on pavers, concrete, brick & clay. Dissolves mineral deposits (efflorescence) Restores original surface color Contains no muriatic acid or hydrochloric acid Ready to use — no diluting needed Pavers Concrete Brick/Clay PREP Thoroughly sweep surface of joint sand, dust, debris or loose material. Spot clean if needed with one of these SRW Specialty Clean™ products: CDX Cleaner & Degreaser X-treme RE Rust Eliminator MC Mold, Moss & Mildew Cleaner OC Organic Stain Cleaner TR Tar, Gum & Rubber Remover Recommended application temperatures are 50°F - 80°F (10°C - 27°C) WET Saturate surface & surrounding area thoroughly (including vegetation). Do not allow product to dry on surface. Re-spray if needed to keep area wet. A 2-person application is recommended. APPLY Apply EF directly to surface with a sprinkler can. Do not dilute. With a stiff bristle brush, scrub area immediately & thoroughly. For large areas, work in 100-150 sq. ft. (9.29–13.94 sq. m.) sections. If working on an incline, start at the highest point, working in small sections. Scrub from bottom of section, pushing excess EF up over job. RINSE Immediately rinse surface & surrounding areas (including vegetation) thoroughly with clean water until all traces of foam disappear. Repeat if necessary. Let dry. Wait at least 24 hours to apply SRW Paver Seal™ products. PART NUMBER SIZE AMT PER CTN QUANTITY SSE CTN 1 gal 4/CTN 36 CTNS/PLT SSE 5GAL 5 gal 1 36/PLT
