This interior fits the Element RC: Bushido 12th Scale in it's Stock RTR Configuration. Deviation from Stock may require some modification. It takes 25 hours to produce a complete interior. Please assume it will take a minimum of 3 Days for your order to ship. If you do not type a color of the parts group, you will recieve the parts in the default color listed. What you get: Tan Tub; Black Dash, Wheel, and Shifter, Red Roll Cage Hardware: 2 - M2.5x6,12 - M2.5x10 What you need: Glue, Paint, Double Sided Tape To install: The sides of the tub will mount with double sided tape or glue to the sides of the body. The front of the Top plate will mount to the underside of the hood with either glue, tape, or the hood vent with two screws through the body. Note: If you are using the stock side mirrors. There are two slots in the side of the dash for them to slip into. The pressure will hold the font in place leaving the only place needed to attach tub being the sides. Optional Cage Note: The back of the dash has registration marks for you to drill (3mm bit) the needed holes to screw the optional cage to the dash. Alternatively, you can use a small dab of glue. If you don't want the cage, there will be no holes to muddy up the look. IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely. Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs. Contact us @ [email protected] or PM us @ Spare-Time Hobbies on Face Book.
Related
Related
Related