IPEX (U.FL) 12mm Two Stage 28dB GPS/GALILEO Active Patch Antenna Module with front-end Saw Filter The AP.12F has been designed specifically for embedded (inside device) integrationwith GPS/GALILEO receiver modules where there is a GSM transmitter nearby and risk of interference and saturation. The AP.12F combines a 12*12*3.5mm advanced low profile ceramic patch antenna with a two stage LNA and a front-end SAW filter with ultra thin coaxial cable. Only 5.6mm in height, this Taoglas active antenna module utilises XtremeGain™ technology for the highest industry sensitivity. The AP.12F consists of 2 functional blocks – the LNA and also the patch antenna. The AP.12F has a SAW filter on the front of it. The main use of the AP.12F would be for small devices where the GSM transmitter is close to the GPS/GALILEO antenna, it helps avoid burn-out of the LNA or the module due to interference from the GSM transmitter at out band frequencies Signal Received: GPS L1 GLONASS G1 GALILEO E1 BDS B1I/B1C SBAS L1 QZSS L1 RF specifications: GPS L1 Galileo E1 LNA Gain 28dB Max. Output VSWR 2.0 Polarization RHCP Axial Ratio 4.0dB max. @Zenith Features: Wide Input Voltage 1.8V to 5.5V Low Power Consumption RoHS & Reach compliant Mechanical Data: Dimensions: 13.4*13.4*6mm (Ground Plane) Weight: 22 gr. Connector: IPEX (U.FL) Cable length: 45 mm Ø1.13 mm Mounting: double sided 3M tape
