Machine Embroidered Archery Patch with Iron-on backing. Attaching the patch to your favourit hat, jacket, or bag is a simple process, just use an iron. Iron-on instructions below. If you want extra security sew round the patch. Dimensions 9 x 4 cm Looking for a customised Patch - email me [email protected] IRON-ON PATCH INSTRUCTIONDo not use on fabrics with low melt/burn point, such as nylon, vinyl, leather. Check your garment label.1. Set time and temperatureSet the temperature to Cotton or 145C (290F) for 5minutes, make sure your steam is off.2. Get PreppedFind a flat surface, iron the area of the garment where patch will be placed.3. Position the Patch on the garment, with the embroidery facing up4. Place a pressing cloth or baking paper over the patch and press firmly for 10seconds5. Flip the garment over and iron the backside of the patch for 10 seconds.6. Let the garment cool7. Check the patch by lifting the edge gently, if it did not stick to the fabric repeat for another 10- 15 seconds, make sure to replace the pressing cloth or baking paper, sometimes there's a residue left from the previous procedure If you want extra security, sew round the patch.
