RailroadTreasures offers the following item: EMD Engine Maintenance Manual Model 567D3 3 Ring Binder Engine Maintenance Manual Model 567D3 Green custom notebook 176 pages Copyright CONTENTS General Engine Information Crankcase and Oil Pan Cylinder Head Assembly and Component Parts Pistons, Connecting Rods, and Connecting Rod Bearings Cylinder Liners Crankshaft, Accessory Drive Gear, Harmonic Balancer, Flywheel, Main and Thrust Bearings Camshaft Gear Train, Camshafts, Overspeed Trip, and Valve Timing Turbocharger & Aftercoolers Lubricating Oil System Cooling System Fuel System and Injector Rack Setting Governor, Engine Speed Control, Rebalancing, and Load Regulator Pilot Valve FOREWORD This manual covers the 16 cylinder Model 567D3 engine and attached accessories as shown in Figs. 0-1 and 0-2. Minor differences, between engines and the manual may be encountered, due to slight refinements in specifications after the manual was sent to press. Refinements in specifications of production engines generally are not reflected in engines already in service. Therefore, we feel it inadvisable to make revisions of manuals already distributed, except when major changes are recommended for engines already in service. Each section of the manual consists of the Description, Operation, Maintenance, Specifications, and Equipment List relative to the particular engine components covered by the section. Wear limits are often given as diametric clearance. This means the total clearance on the diameter. Most diametric clearances can be measured by placing a feeler gauge on only one side of the object being checked. Other items may have to be checked by measuring the outside diameter of the shaft, using a micrometer, and subtracting this figure from the inside diameter of the bearing in which the shaft turns. A ball micrometer for measuring wall thickness of bearings, and a dial indicator for measuring diametric and longitudinal clearances will be found necessary. For measuring clearances such as piston to cylinder head, or oil pump gears to housing, the use of lead ribbon is recommended. The lead ribbon is inserted between the parts, removed and measured to obtain the clearance. Radial clearance is specified when the nature of the part is such that diametric clearance cannot be measured. The radial clearance is always one-half of the diametric clearance. Longitudinal or thrust clearances are listed throughout the manual with all of the clearances removed at one end of the part being measured. Where it is not convenient to take out all of the thrust at one end, the thrust at each end should be measured and added, to give the total longitudinal clearance. All pictures are of the actual item. There may be reflection from the lights in some photos. We try to take photos of any damage. If this is a railroad item, this material is obsolete and no longer in use by the railroad. Please email with questions. Publishers of Train Shed Cyclopedias and Stephans Railroad Directories. Large inventory of railroad books and magazines. Thank you for buying from us. Shipping charges US Shipments: When you add multiple items to your cart, the reduced shipping charges will automatically be calculated. For direct postage rates to other countries, send me an email. Shipping varies by weight. Terms and conditions All sales are final. Returns accepted if item is not as described. Contact us before making a return. No warranty is stated or implied. Please e-mail us with any questions before bidding or buying. Thanks for looking at our items.
Related
Related
Related