EMX Carsense 101 Vehicle Motion Detector with Sensing Probe | EMX-CS-101 The CarSense101 operates by detecting the movement of vehicles near the probe with an adjustable detection range up to 12 feet at a minimum speed of 5 mph. The CS101 will only detect a moving vehicle and will not detect a stationary vehicle. It may be used as a free exit sensor to allow gates to open and guests to exit without the use of a key fob or passcode. The CS101 may also be wired to notify a home automation system or security system that a vehicle is moving down a driveway. This vehicle motion detector requires a probe that is ordered separately and available in 50, 100, or 150-foot lead lengths. The CS101 provides a solution for many vehicle detection challenges, including: Safety – detects moving vehicles in blind areas along a driving path and actuates warning lights Security – detects approaching vehicles or unauthorized movement of parked vehicles and actuates alarms, video cameras or other annunciators Access control – acts as a free exit vehicle detector for gates, overhead doors and parking barriers Note: Sensing probe is sold separately. Manufacturer's Warranty 2 Years Features Controls and indicators are mounted on front panel Available in 9 – 41 VDC 6 – 29 VAC Low 2.5 mA standby current consumption, makes it an excellent choice for solar power applications. Housed in a small, relay-type housing Surge protection Easy to use and install Easy upgrade or switch out to new devices Quick access to controls Buried sensing probe protects against potential intruders Wide power supply options Energy conservation Technical Specifications Power Supply: 9 - 41 VDC or 6 - 29 VAC Power Supply Tolerance: +/– 20% from the power rating Standby Current: 2.5mA maximum Detect Current: 50mA maximum Relay Type: DPDT Relay Rating: 1A 24V DC 120V AC Sensitivity: High, Low adjustment Off Delay: 1 to 5 seconds adjustment Control Unit Temperature Range: -40° F to 170° F Probe Temperature Range: -40° F to 170° F Power-On Indicator: High-intensity Green LED Detect Indicator: High-intensity Red LED Sensitivity Control: Continuous adjustment Off Delay Control: Continuous adjustment Surge Protection: MOV, neon, and silicon protection devices Control Unit Housing: Break-resistant Polycarbonate H:2.2”(55mm), W:1.6”(41mm), D:3.25”(84mm) Connector: 86CP11 11-pin connector Probe: PVC watertight housing (Length 17”, Diameter 1”) with shielded direct burial lead-in cable Cautions and Warnings The CS101 is designed to detect moving vehicles. It is not suitable for use as a vehicle presence detector, such as a reversing loop for a gate or door. The CS101 detects ferrous metals. It will not detect aluminum, but will detect any moving ferrous metallic object. The probe must be stationary to function properly. Product Literature EMX-CS-101 Spec Sheet EMX-CS-101 Manual Instruction
