EMX Retroreflective Photoeye Only | EMX-NIR

All Security Equipment Verified independent store

→

EMX Retroreflective Photoeye Only | EMX-NIR The NIR retroreflective infrared photoeye is an external entrapment protection device Type B1, non-contact sensor for use with automatic gates and doors. Since the reflector directs the beam back to the photoeye, wiring to the other side of the roadway is not needed. The NIR operates up to 30 feet over a voltage range of 12-240 VDC and 24-240 VAC. Two LED indicators provide status information at a glance making set-up and alignment easy. The NIR retroreflective photoeye may be used as a reversing sensor for: Commercial overhead doors Gates Parking barriers Features Retroreflective configuration 30 ft. operating range Sensitivity adjustment Wide range operating voltage IP66 enclosure Manufacturer's Warranty 2 Years Technical Specification Operating Temperature: -20° C to +55°C (-4°F to +131°F) Operating Voltage: 12 – 240 Volts DC, 24 – 240 Volts AC Dimensions: H = 2.5”, D = 1.5”, W = 0.75” Lead Wire: 6 feet Response Time: 10 ms maximum Fail-Safe Relay Output: 125V AC 0.6A, 110V DC 0.6A, 30V DC 2A. Environmental Protection: IP66 (IEC) Certifications: CE Cautions and Warnings This product is an accessory or part of a system. Install the NIR according to the instructions from the gate or door operator manufacturer. Comply with all applicable codes and safety regulations. Retroreflective photoeyes rely on a reflective surface (a reflector) for proper operation. In some cases, a vehicle with a reflective surface at a given distance can act as a reflector and allow the gate to close on a vehicle. Product Literature EMX-NIR Spec Sheet EMX-NIR Instruction Manual Show more