The Beat-Sonic ENA-3C1 is a plug-and-play amplifier kit that dramatically improves the sound quality of your factory Chevy Silverado stereo - and adds a dedicated RCA subwoofer output for easy bass expansion. No cutting, no harness modifications, and no need to replace your head unit or speakers. More clarity. More bass. More detail. All from a single compact unit that installs in under two hours. Professional local installation available in La Mirada, Southern California. Contact us at [email protected] to book. Why your factory stereo sounds underwhelming - and how the ENA-3C1 fixes it Chevy factory head units are built to a cost. The amplifier stage inside your OEM radio is one of the first areas where manufacturers cut corners, resulting in a flat, compressed sound even through otherwise decent factory speakers. The ENA-3C1 solves this by strengthening and optimizing the audio signal before it reaches your factory amplifier - giving it a cleaner, more powerful signal to work with, and allowing your factory system to perform closer to its true potential across all frequency ranges. Your factory head unit, steering wheel controls, and speakers all stay in place and continue to work exactly as before. You simply get the sound your system was always capable of - finally unlocked. And with the dedicated RCA subwoofer output, adding a powered subwoofer is as simple as running a single RCA cable. Key features Plug-and-play installation - no special tools, no harness modifications, no cutting 50W x 4-channel output - significantly more power than factory head unit amplification Dedicated RCA subwoofer output - easily add a powered subwoofer without additional wiring complexity High-quality FET op-amp input stage - reproduces fine musical detail including voice tone and breath at high resolution Ultra-compact design - flexible installation location, fits easily behind the dash Premium acoustic components - low-impedance capacitors and 70μ extra copper thickness for improved frequency response across low, mid, and high ranges Retains factory head unit - your display, controls, and all factory features continue to work normally Compatible with aftermarket speakers - keep impedance at 4Ω-8Ω when using aftermarket speakers Made in Japan Specifications Maximum output: 50W x 4ch (4Ω) Compatible impedance: 4-8Ω Input sensitivity: 0.5-5V Frequency response: 15-80kHz (+0, -1dB) Total harmonic distortion: 0.01% (1kHz / 4Ω) Power supply: DC12V (minus ground), DC11V-15V range Current consumption: 0.2A (no signal) Fuse: 15A Audio output: AUX level (RCA) + speaker level (high-level input) Dimensions: 96mm (W) x 40mm (D) x 113.5mm (H) Weight: 420g Compatible vehicles The ENA-3C1 is compatible with the following 2019-2026 Chevy Silverado trims - non-Bose, 7-inch display screen only: Show compatible and non-compatible trims ▼ Make Model Years Trim Compatible Chevrolet Silverado 2019-2026 WT Yes - 7" screen, no Bose Chevrolet Silverado 2019-2026 Custom Yes - 7" screen, no Bose Chevrolet Silverado 2019-2026 Custom Trail Boss Yes - 7" screen, no Bose Chevrolet Silverado 2019-2026 LT Not Compatible Chevrolet Silverado 2019-2026 RST Not Compatible Chevrolet Silverado 2019-2026 LTZ Not Compatible Chevrolet Silverado 2019-2026 LT Trail Boss Not Compatible Chevrolet Silverado 2019-2026 High Country (Bose) Not Compatible Chevrolet Silverado 2019-2026 ZR2 (Bose) Not Compatible Not sure which trim, screen size, or audio system you have? Email [email protected] with your year, model, and trim before purchasing. Important: This kit is ONLY compatible with the 7-inch display screen. It is NOT compatible with 8-inch or larger screens. To measure your screen size, use a tape measure or ruler and measure diagonally from the top-left corner of the screen to the bottom-right corner. If your measurement is larger than 7 inches, this kit is not compatible with your vehicle. This kit is also NOT compatible with BOSE-equipped models. If your Silverado has a BOSE audio system, this kit will not work. Not sure which screen size or audio system your Silverado has? Check your window sticker, owner's manual, or email [email protected] with your year, model, and trim before purchasing. Installation No special tools required. No modifications to the factory wiring harness. Most owners complete the install in under two hours using our step-by-step YouTube video guides. Professional installation is available in Southern California through Beat-Sonic directly, or through our authorized installer network worldwide. Email [email protected] with your location or zip code to find the nearest shop. Frequently asked questions Will I need to replace my factory speakers or head unit?No. The ENA-3C1 works with your existing factory head unit and speakers. You keep everything in place - the amp simply adds power and clarity to what you already have. Is this compatible with aftermarket head units?The ENA-3C1 works with aftermarket head units as long as the factory head unit retains the factory connectors that our ENA-3C1 plug and play harness connects to. How do I know if I have the 7-inch screen?Measure your screen diagonally from the top-left corner to the bottom-right corner. If the measurement is 7 inches, this kit is compatible. If the measurement is 8 inches or larger, this kit is not compatible with your vehicle. If you are unsure, email [email protected] with your year, model, and trim before purchasing. Is this compatible with Bose factory systems?No. The ENA-3C1 is only compatible with non-Bose models. If your Silverado is equipped with a factory Bose audio system, this kit will not work. Can I add a powered subwoofer with this amp?Yes. The ENA-3C1 includes a dedicated RCA subwoofer output specifically for easy subwoofer expansion. Simply run an RCA cable from the sub output to your powered subwoofer. Can I use aftermarket speakers with this amp?Yes. If using new aftermarket speakers, keep the impedance at 4Ω-8Ω. Will my steering wheel controls still work?Yes. All factory features including steering wheel controls and your factory display continue to work normally. What is the RMS output vs. peak output?The 50W x 4ch rating is peak output. RMS is the continuous power output your amp delivers - peak is during short bursts. This is standard across the amplifier industry. How long does installation take?Most installs take about 2 hours following our YouTube video guide. Professional installation is available in Southern California or through our authorized installer network worldwide. Does this ship to Canada or internationally?Yes. We ship to Canada and Mexico.
Related
Related
Related
Related