Envirotex Lite High-Gloss Epoxy Coating EX-88 is a crystal-clear, ultra-durable, high-gloss epoxy designed to deliver a deep, glass-like finish in just one layer when applied to a properly sealed surface. Perfect for projects that require a professional-grade, waterproof, and heat-resistant coating. Key Features ✅ Waterproof ProtectionCreates a strong, moisture-resistant barrier for long-lasting durability. ✅ Heat ResistantHolds up under heat exposure without compromising strength or clarity. ✅ Self-Leveling FormulaEffortlessly spreads into a smooth, even surface for a flawless finish. ✅ Extended Working Time25-minute open time at 70°F gives you plenty of time to work before it begins to set. ✅ Bubble Release TechnologyFormulated to release bubbles naturally when poured immediately after mixing. Usage Guidelines Working Time (Open Time):You’ll have approximately 25 minutes to work with EX-88 at 70°F.Tip: Warmer temperatures will shorten this window, so pour immediately after mixing. Surface Preparation:Always seal your surface before application to improve adhesion, prevent air bubbles, and ensure a crystal-clear finish. Pouring Technique:Pour right after mixing for the best self-leveling effect and maximum bubble release. Frequently Asked Questions Q: How do I prevent bubbles?🫧 Pour the epoxy immediately after mixing. You can also use a torch or heat gun to pop any stubborn surface bubbles. Q: Can EX-88 be used for deep pours?⚡ No — EX-88 is designed for surface coatings only. For thicker projects, use a deep-pour epoxy. Q: How long does EX-88 take to cure?⏲️ Cure times vary depending on temperature and humidity, but it typically fully cures within 24–72 hours. Q: What are the best storage conditions?❄️ Store resin in a cool, dark place (60°F–75°F / 15°C–24°C), away from sunlight and moisture.Pro Tip: Wipe container tops before sealing to prevent stuck caps. Q: What environment is best for pouring?☀️ Work in a ventilated, temperature-controlled area with humidity below 60% to avoid cloudiness and bubbles.To protect your cured project from yellowing or warping, keep it out of direct sunlight. For extra UV protection, consider using Amazing Clear Cast Plus.
