Epoxy glue consists of two components: a resin and a hardener. These 2-part components are stored in separate containers to maintain their integrity until ready for use. When the resin and hardener are mixed in the correct proportions, a chemical reaction occurs, initiating the curing process. This reaction creates a strong and durable bond, making epoxi glue suitable for a wide range of applications. Content: 30ml INSTRUCTIONS FOR USE: Clean and dry the surfaces to be bonded, and roughen them with emery cloth or sandpaper for better results. Mix equal amounts of the resin and hardener thoroughly for about 1 minute, and apply it to both surfaces before mating the parts together. Remove any excess epoxy immediately with acetone-based nail varnish remover. Allow the strong glue to fixture for 5 minutes and fully cure for 12 hours. Remember to wear appropriate personal protective equipment. SAFETY GUIDELINES: Always use in a well-ventilated area. If medical advice is needed, have a product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Specific treatment is required (see additional first aid instructions on this label). Dispose of contents to an approved waste treatment facility. WARNINGS: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful to aquatic life with long-lasting effects. It contains Bis- [4- (2, 3- epoxipropoxi) phenyl] propane. Reaction products of pentaerythritol, propoxylated and 1- chloro 2, 3- epoxypropane with hydrogen sulfide.
