The Epson DX4 printhead (6000005213) is a genuine original eco-solvent print head used in Roland, Mimaki, and Mutoh wide-format printers. Designed for high-performance printing, this DX4 head delivers 360 dpi resolution, 360 nozzles, and consistent output for solvent, UV, and aqueous applications. Roland part numbers: 1000002201 / 22805470 / 6000005213. Mutoh part number: DF-49733 / DG-42386. Mimaki part number: M004905. Important note for VersaUV users: the 6000005180 DX4 gold printhead is the recommended option for VersaUV printers, however the standard 6000005213 can also be used with firmware 1.4 or higher. All printheads installed in the same printer must be identical, a mixed configuration of standard and gold DX4 heads will not function properly. Please Note: Due to the delicate nature of DTF inks and the risk of damage from improper installation or nozzle blockage, we cannot accept returns, exchanges, or refunds once the printhead has been installed. All sales are final. Please ensure proper installation procedures are followed. Technical Specifications Specification Detail Technology Epson MicroPiezo Generation 4th generation (DX4) Nozzle configuration 2 channels × 180 nozzles = 360 total nozzles Native resolution 360 dpi Drop size Minimum 3.5 picoliters, variable Ink channels 2 independent channels (1 or 2 colours) Firing frequency 8 kHz typical Ink compatibility Eco-solvent, mild solvent, aqueous Condition 100% genuine original, brand new, sealed Roland packaging Compatible Part Numbers Brand Part Numbers Roland 1000002201 / 22805470 / 6000005213 Mutoh DF-49684 / DG-42386 Mimaki M004905 Compatible Printers This printhead is compatible with the following printers: Canon Océ CS9065 Canon Océ CS9090 Canon Océ CS9265 Canon Océ CS9290 Mimaki JV3-130S Mimaki JV3-130SL Mimaki JV3-130SP II Mimaki JV3-160S Mimaki JV3-160SP Mimaki JV3-250SP Mimaki JV3-75SP II Mimaki TX2-1600 Mutoh Blizzard 65 Mutoh Blizzard 90 Mutoh Rockhopper 3 65 Mutoh Rockhopper 3 90 Mutoh Rockhopper 3 Extreme 65 Mutoh Rockhopper 3 Extreme 90 Mutoh Rockhopper II 50 Mutoh Rockhopper II 64 Mutoh Rockhopper II 87 Mutoh Rockhopper II K Plus Mutoh Rockhopper II-2H Mutoh Rockhopper II-4H Mutoh Spitfire 65 Mutoh Spitfire 90 Mutoh Spitfire 100 Extreme Mutoh Valuejet 2606 Roland CJ-540 Roland FJ-540 Roland FJ-640 Roland FJ-740 Roland FP-740 Roland LEC-300 Roland LEC-330 Roland LEC-540 Roland LEF-12 Roland LEF-12i Roland LEF-20 Roland LEF-200 Roland LEF-300 Roland LEF2-200 Roland LEF2-300 Roland LEJ-640 Roland RS-540 Roland RS-640 Roland SC-540 Roland SC-545EX Roland SJ-540 Roland SJ-640 Roland SJ-645EX Roland SJ-740 Roland SJ-745EX Roland SJ-1000 Roland SJ-1045EX Roland SP-300 Roland SP-300i Roland SP-300V Roland SP-540i Roland SP-540V Roland VP-300 Roland VP-300i Roland VP-540 Roland VP-540i Roland XC-540 Roland XC-540MT Roland XJ-540 Roland XJ-640 Roland XJ-740 Uniform Cadet Uniform Cadet Plus Uniform Fusilier Xerox 8265 Xerox 8290 Xerox 8365 Xerox 8390 Not sure if this fits your printer? Contact us — our US-based support team will confirm compatibility before you order. DX4 vs DX5 — Which Do You Need? The DX4 and DX5 are not interchangeable. The DX4 has 2 ink channels and 360 total nozzles at 360 dpi native. The DX5 has 8 ink channels and 1,440 nozzles at 1440 dpi native. The DX4 is used in older Roland CJ, FJ, SC, SJ, and XC series machines. If you are unsure which generation your printer uses, check your printer model in the compatibility list above or contact our team before ordering. DX4 Standard vs DX4 Gold (VersaUV) The standard DX4 (part 6000005213) and the gold DX4 (part 6000005180) are both compatible with Roland VersaUV printers running firmware 1.4 or higher. However all printheads installed in one printer must be the same type — a mixed configuration of standard and gold is not supported. The gold version is recommended for dedicated VersaUV use. Contact our team if you need to confirm which version your VersaUV printer requires. Recommended Accessories — Replace at the Same Time When replacing an Epson DX4 always replace the dampers and cables at the same time. Installing a new head on worn accessories is the leading cause of premature failure. In eco-solvent use a DX4 printhead typically lasts 9 to 12 months — see our printhead lifespan guide for replacement cycles by model and tips to extend service life: • DX4 compatible eco-solvent ink dampers — replace every printhead change • Head data cables — inspect and replace if worn • Capping station — inspect at the same time Why Buy from Digiprint USA • 100% genuine original Epson DX4 — not compatible, not refurbished • Delivered in original sealed Roland packaging • In stock in Doral, Miami FL — same day shipping before 2PM EST • Ideal for Latin American print shops using Miami freight forwarders • Free technical support — we confirm DX4 vs DX5 and part number compatibility before you order View all genuine Epson printheads stocked by Digiprint USA. Frequently Asked Questions What Roland printers use the Epson DX4 printhead?Roland CJ-540, FJ-540, FJ-640, FJ-740, SC-540, SJ-540, SJ-640, SJ-740, SJ-1045, XC-540, and others all use the DX4. If your Roland model is not listed, contact our team before ordering. What is the difference between DX4 and DX5?The DX4 has 2 ink channels and 360 total nozzles. The DX5 has 8 ink channels and 1,440 nozzles. They are completely different generations and are not interchangeable. Check your printer model carefully before ordering. What are the Roland part numbers for the DX4?The primary Roland part numbers are 1000002201, 22805470, and 6000005213. All three refer to the same DX4 printhead. The Mutoh equivalent is DF-49684 / DG-42386 and the Mimaki equivalent is M004905. How long does the DX4 printhead last?In typical eco-solvent use the DX4 lasts 9 to 12 months — significantly longer than DTF printheads, because eco-solvent inks are far less abrasive on the nozzle plate than water-based DTF white ink. Replacing dampers at each head change and maintaining the capping station extends service life. See our printhead lifespan guide for full data across all Epson models. Can the DX4 be used in VersaUV printers?Yes — the standard DX4 (6000005213) can be used in Roland VersaUV printers running firmware 1.4 or higher. However all printheads in the printer must be the same type. The gold DX4 (6000005180) is the recommended version for VersaUV. Contact our team to confirm. Do you ship Epson DX4 printheads to Latin America?Yes — same day shipping from our Doral, Miami FL warehouse. Our Miami location is ideal for Latin American print shops and resellers using freight forwarders in the Doral area.
Related
Related
Related
Related