The Epson i3200-E1 is a genuine original Epson PrecisionCore MicroTFP eco-solvent printhead — the E1 (eco-solvent) variant of Epson's i3200 series wide-format production printhead. Featuring 3,200 nozzles across 8 rows, 600 dpi native resolution, 6–12.3pl VSDT variable drop technology, and an unlocked configuration for flexible integration in compatible eco-solvent printer systems, the i3200-E1 delivers high-productivity, high-image-quality output for outdoor signage, banners, vehicle wrap, posters, and wide-format advertising applications. Made in Japan using Epson's MEMS (Micro-Electro-Mechanical Systems) manufacturing process. Compatible with Signstar, Sinocolor, Mutoh XpertJet, and a broad range of Chinese-manufactured eco-solvent wide-format printers using the i3200-E1 printhead. Every i3200-E1 we sell at Digiprint USA is 100% genuine original Epson. Please Note: Due to the delicate nature of DTF inks and the risk of damage from improper installation or nozzle blockage, we cannot accept returns, exchanges, or refunds once the printhead has been installed. All sales are final. Please ensure proper installation procedures are followed. Technical Specifications Specification Detail Model Epson i3200-E1, C14FA71000, Country of Origin: Japan Ink variant E1 = Eco-solvent inks only Technology Epson PrecisionCore MicroTFP (MEMS manufacturing) OEM status 100% genuine original Epson — unlocked, Japan-made Total nozzles 3,200 (8 rows × 400 nozzles per row) Nozzle resolution 300 NPI per row / 600 NPI per 2 rows (600 dpi effective) Effective print width 33.8mm (1.33 inches) Drop volume Binary: 6pl at 43.2kHz / Greyscale: 6–12.3pl at 21.6kHz (VSDT) Drop technology VSDT — Variable Sized Droplet Technology (smooth gradients, fine detail) Colour channels Up to 4 colours (2 nozzle rows per colour) Dimensions 69.1 × 59.4 × 35.6mm Weight 82g Lock status Unlocked — flexible integration in compatible eco-solvent systems Country of origin Japan i3200-E1 vs i3200-A1 vs i3200-U1 — Choosing the Correct Variant Model Ink Type Primary Applications Heater i3200-E1 (this listing) Eco-solvent Outdoor signage, banners, vehicle wrap, posters, stickers No i3200-A1 Water-based / aqueous DTF, sublimation, textile printing No i3200-U1 UV-curable UV flatbed, UV roll-to-roll, UV DTF Yes Which Eco-Solvent Printers Is the i3200-E1 Compatible With? This printhead is compatible with all eco-solvent wide-format printers using the Epson i3200-E1 printhead, including: Mutoh XpertJet XPJ-1641SR Signstar BT-1804EL Signstar EF-8i Signstar EK-1602 Signstar EX-1802 Signstar EX-1804 Signstar EY-4i Sinocolor SJ-740S Sinocolor SJ-1260S Sinocolor SJ-3200S The i3200-E1 is also used across a wide range of Chinese-manufactured eco-solvent wide-format printers. Not sure if this fits your printer? Contact us — our US-based support team will confirm compatibility before you order. What Is the Epson i3200-E1 and What Makes It Different from Other i3200 Variants? The Epson i3200-E1 is the eco-solvent ink variant of Epson's i3200 PrecisionCore MicroTFP printhead series. The "E" in E1 designates eco-solvent ink compatibility — the nozzle plate coating, internal ink flow path materials, and seal compounds are engineered specifically for the chemical composition of eco-solvent inks, which contain mild petroleum-derived solvents that would degrade the EPDM seals and water-based coatings used in the A1 (aqueous) variant. The E1's unlocked status means it can be freely integrated into compatible third-party eco-solvent printer systems without firmware restrictions — unlike locked Epson OEM heads that are bound to specific Epson-branded printers. The MEMS (Micro-Electro-Mechanical Systems) manufacturing process delivers precisely round ink droplets with consistent placement accuracy, and the VSDT (Variable Sized Droplet Technology) enables smooth gradient reproduction by freely varying ejected droplet volume between 6pl and 12.3pl within a single print pass. Why Genuine Epson i3200-E1 — Not Compatible or Refurbished The i3200-E1's MEMS-manufactured nozzle plate achieves the precise roundness and consistent nozzle diameter that enables VSDT variable drop performance. Compatible i3200-E1 heads produced by third-party manufacturers use photolithography processes that do not achieve the same nozzle geometry consistency — resulting in irregular drop formation, colour shift from the RIP profile, and reduced nozzle lifespan. Refurbished i3200-E1 heads have had their nozzle surface re-coated after exceeding their rated actuation cycles, producing early nozzle row failures within 3–6 months compared to the 12–18 month typical service life of a genuine Epson original. Every i3200-E1 sold by Digiprint USA is genuine original Epson from authorised distribution channels. Why Buy from Digiprint USA • 100% genuine original Epson i3200-E1 — MEMS Japan-made, unlocked, manufacturer warranty • 3,200 nozzles, 600 dpi, VSDT 6–12.3pl — production-grade eco-solvent output for signage and advertising • Unlocked configuration — compatible with Signstar, Sinocolor, Mutoh XpertJet, and Chinese eco-solvent platforms • In stock in Doral, Miami FL — same day shipping before 2PM EST • We also stock the i3200-A1 (water-based/DTF) and i3200-U1 (UV) variants • Ideal for Latin American eco-solvent signage operations and wide-format print shops using Miami freight forwarders Browse our full range of Epson i3200 and eco-solvent printheads stocked by Digiprint USA. View all eco-solvent printer spare parts and accessories stocked by Digiprint USA. Frequently Asked Questions What is the Epson i3200-E1 printhead?The Epson i3200-E1 is the eco-solvent ink variant of Epson's i3200 PrecisionCore MicroTFP printhead series. It has 3,200 nozzles across 8 rows, 600 dpi native resolution, 6–12.3pl VSDT variable drop technology, and an unlocked configuration. It is designed for eco-solvent ink systems used in wide-format outdoor signage, banners, vehicle wrap, and advertising print production. How many nozzles does the Epson i3200-E1 have?The Epson i3200-E1 has 3,200 nozzles — 8 nozzle rows with 400 nozzles per row. This is the same nozzle count as the i3200-A1 (water-based) and i3200-U1 (UV) variants. The nozzle density is 300 NPI per row, achieving 600 NPI across each pair of interleaved rows — equivalent to 600 dpi per colour channel. What is the difference between i3200-E1, i3200-A1, and i3200-U1?All three are the same physical i3200 PrecisionCore MicroTFP printhead platform with different nozzle plate coatings and internal materials matched to different ink chemistries: E1 for eco-solvent, A1 for water-based (DTF/sublimation/aqueous), U1 for UV-curable. The three variants are not interchangeable. Always confirm your printer's ink system matches the head variant before ordering. What does "unlocked" mean for the i3200-E1?The i3200-E1 is unlocked — meaning it has no firmware restriction binding it to a specific Epson-branded printer. It can be freely integrated into any compatible third-party eco-solvent printer system designed for the i3200-E1. This makes it suitable for Signstar, Sinocolor, Mutoh XpertJet, and a wide range of Chinese-manufactured eco-solvent production printers. Do you ship Epson i3200-E1 printheads to Latin America?Yes — same day shipping from our Doral, Miami FL warehouse for orders placed before 2PM EST. Digiprint USA is located in Doral — the primary freight forwarder hub for Latin America — making us the closest US supplier to eco-solvent signage operations in Colombia, Mexico, Brazil, Peru, Chile, Argentina, and the Caribbean.
