Condensation Curing Silicone, can be scanned with optical / laser / tactile reading systems.To be used in combination with the Enersyl catalyst. Laboratory type C silicone, perfectly adapts to all techniques and fields of application within the dental laboratory and dental clinic. • High accuracy (50 µm)• Final hardness (80 or 92 Shore A) achieved in a short time• Optimal viscosity and mix workability• Excellent compression resistance• Strong adhesion to cyanoacrylate• Compatible with self and thermo-setting acrylic resins• Excellent resistance to heat (120°C)• Long working time (4 minutes)• Easy finishing by burs• Compatible with latex gloves Available in: Kit: 92 Shore A1 x 5kg with 2x 60ml catalyst 1x 60ml catalyst CHARACTERISTICS Ergasil combines practicality of use with a series of advantages that allow the technician to obtain maximum precision in the construction of the prosthetic product.The long processing time allows it to be adapted to the areas very easily without incurring risks of pre-hardening the material.The degree of useful hardness achieved by Ergasil silicone in a short time allows to work on widely stable masses, constituting a huge advantage for the optimization of the processing and time saving phases. Following the manufacturer’s proportions instructions will allow you to get the best out of Ergasil and take full advantage of the available working time. Take one or more level spoonful of silicone and after flattening it spread a 5 cm long uniform line of catalyst for each spoon used. Mix until you obtain a uniform color compound and the material will be ready for use. Ergasil 4 minutes long working time allows you to position the material with care without risking to work on a silicone that is already setting. mixing time 30’’ working time* 4 ’’ shore-A hardness (after 24 hours ) 92 accuracy (µm) 50 dimensional variation (after 24 hours) -0,1% compressive strength 0,7% heat resistance over 120 °C *tested at 23°C. Instructions For Use
