SPECIFICATIONSBrand Name: diymoreChoice: yesCondition: NewHigh-concerned chemical: NoneOrigin: Mainland ChinaType: Voltage Regulatorsemi_Choice: yes Features:1. The ESP32 DevKitC development board adopts the mainstream TYPE-C interface, and the motherboard can be equipped with ESP32 modules: ESP-32, ESP-32D, ESP-32U, ESP32 .2. ESP32 DevKitC is an entry-level ESP32 development board with integrated ESP32 pins that are easy to connect and use, and can be easily plugged into the breadboard.3. ESP32 DevKitC is a small development board based on the ESP32 module, supporting Wi Fi and Bluetooth functions, with rich peripherals, allowing users to easily develop products.4. The onboard LDO is led out and can power external components. ESP32 DevKitC groups different peripheral interfaces to help users easily get started with product development.5. ESP32 DevKitC has excellent RF performance, and users do not need to consider RF and antenna design when designing and developing applications. The basic system requirements are already included on the board, and users only need to connect a USB cable to proceed with development. Parameter:ESP32 DevKitC Development Board:Module based on ESP32EN: Reset button.Boot: Download button. Press and hold the Boot key, while pressing the EN key once (do not release the Boot key at this time) to enter the "Firmware Download" mode and download the firmware through the serial port.USB-to-UART bridge: A single chip USB-UART bridge that can provide a transmission rate of up to 3 Mbps.Interface: TYPE-C interface, which can be used as a power supply for circuit boards or as a communication interface between PC and ESP32-32 modules.Communication: 2.4 GHz Wi Fi+BluetoothProcessor: High performance Xtensa@32 Bit LX6 dual core processor, ultra low power co processorMultiple peripherals: with the best power consumption performance, RF performance, stability, versatility, and reliability, suitable for various application scenarios and different power consumption requirements.The development board can choose from any of the following three power supply methods:TYPE-C interface power supply (default)5V/GND pin power supply3V3/GND pin power supplySize: 54.4 * 27.9mm ESP-32D:Chip: ESP32-D0WDSPI: Flash 32 Mbit, 3.3 VCrystal oscillator: 40 MHzAntenna: onboard PCB antennaWi Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps)Aggregation of A-MPDU and A-MSDU, supporting 0.4 µ s protection intervalWorking channel center frequency range: 2412~2484 MHzBluetooth protocol: compliant with BT v4.2 BR/EDR and BT LE standardsRF: NZIF receiver with sensitivity of -97 dBm; Class-1, Class-2, and Class-3 emitters; AFHIntegrated crystal oscillator: 40 MHz crystal oscillatorIntegrated SPI flash 1: 4 MBWorking voltage/supply voltage: 3.0 V~3.6 VAverage working current: 80 mAMinimum power supply current: 500 mASuggested working environment temperature range: -40 ℃~+85 ℃ ESP-32U:Chip: ESP32-D0WDSPI: Flash 32 Mbit, 3.3 VCrystal oscillator: 40 MHzAntenna: External antenna connector, which needs to be used together with an external antennaWi Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps)Aggregation of A-MPDU and A-MSDU, supporting 0.4 µ s protection intervalWorking channel center frequency range: 2412~2484 MHzBluetooth protocol: compliant with BT v4.2 BR/EDR and BT LE standardsRF: NZIF receiver with sensitivity of -97 dBm; Class-1, Class-2, and Class-3 emitters; AFHIntegrated crystal oscillator: 40 MHz crystal oscillatorIntegrated SPI flash 1: 4 MBWorking voltage/supply voltage: 3.0 V~3.6 VAverage working current: 80 mAMinimum power supply current: 500 mASuggested working environment temperature range: -40 ℃~+85 ℃ ESP32 WROVER:Power supply voltage: 2.3V~3.6VFrequency: 2.4GHz~2.5GHzInstallation type: SMTData rate: 150MbpsProtocol: 802.11b/g/nStorage capacity: 4MBWi Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps)Aggregation of A-MPDU and A-MSDU, supporting 0.4 µ s protection intervalWorking channel center frequency range: 2412~2484 MHzBluetooth protocol: Complies with Bluetooth V4.2 BR/EDR and low-power Bluetooth standardsRF: NZIF receiver with sensitivity of -97 dBmClass-1, Class-2, and Class-3 emitters; AFHModule interface: SD card, UART, SPI, SDIO, I2C, LED PWM, motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, TWAI ® (Compatible with ISO 11898-1 protocol, i.e. CAN specification 2.0)On chip sensor: Hall sensorIntegrated crystal oscillator: 40 MHz crystal oscillatorIntegrated SPI flash: 4 MBIntegrated PSRAM: 8 MBWorking voltage/supply voltage: 2.3 V~3.6 VWorking current: average: 80 mAMinimum supply current: 500 mASuggested working environment temperature -40 ℃to 85 ℃ Package include:1X development board
Related
Related
Related
Related