You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco around the corner in the yard – on your model railroad? No problem with ESU’s LokProgrammer! One prerequisite: A PC with sound card and Windows (Windows 8.1 and higher). Simply record the original sound of your engine and edit it at home with your computer. Many customers did this already successfully. Even if you don’t yet belong to this elite group of LokSound Pro’s, the LokProgrammer is still a very useful tool for you. It is the easiest way to program your ESU-decoder. You need no programming experience, thanks to the graphic screen everything falls into place with a few mouse clicks. What the LokProgrammer can do: Change the sound saved on the decoder. Setting of all digital parameters of the Loksound decoder such as address of the loco, operation speed, maximum speed, braking deceleration, brightness of lights etc; you can set all options with your computer very easily - no cumbersome entering of CVs (configuration variables) with your command station. Rearrange your sounds and transfer it to the LokSound decoder. You can use all sounds that can be downloaded to your computer hard disk. Sound can be allocated to different events. Additional sounds can be activated via function buttons. Sound With the LokProgrammer you can replace the sound data of any LokSound decoder as many times as you wish with a different sound. To this end we offer more than 200 different, fully matching sounds of various prototypes and locos for downloading on your computer. Also you can edit just parts of a sound project: You don’t like the horn/whistle? Just replace it with one of the many others. Suitable sources beside those offered by us, are available in Windows *.wav format. Sound – even your voice or music is no problem for our decoders. With the LokProgrammer’s aid you use the entire flexibility and functionality offered by LokSound decoders. Programming By the same token, all other ESU decoders profit from the LokProgrammer’s versatility; no matter if DCC, Multiprotocol - or mfx decoder. With its help it’s possible to edit all parameters of the particular decoder simply and conveniently. The available options depend on the kind of decoder. Besides addresses and acceleration / deceleration settings, this concerns above all the allotment of function keys (function mapping), the allocation of special effects to the individual outputs, or the lamp brightness. The LokProgrammer can also help when optimizing back EMF parameters or the loadable speed table. All options can be programmed very conveniently: There is no tedious punching-in of CV-numbers at the digital station anymore. Hook up It’s this simple: The LokProgrammer is a small programming box, which is wired between the PC and a programming track. To connect it you use the included USBadapter cable (works with Windows up to Windows 11). For power we include a 500 mA wall power supply. If your needs are greater (e.g. for gauge I engines), you can also use a conventional model railroad transformer. Software After hook-up you start up the especially user-friendly LokProgrammer software. This runs on all modern Windows-systems (Windows 8.1 and higher). Just put a locomotive with an ESU decoder on a piece of track connected to the LokProgrammer, and right away you can read, edit or program it. The Programmer automatically recognizes the decoder in the locomotive. Simplicity The LokProgrammer is recommended not only for the use with ESU "retail" decoders: Many well known model railroad manufacturers factory-furnish their locos with ESU-decoders. The parameters of these decoders can be modified again with the help of the LokProgrammer to suit the needs of your operations. You see, purchasing a LokProgrammer pays off in any case. Upgrades The LokProgrammer can also be instrumental in updating decoders. Almost all ESU decoders are firmware updatable, in case you desire a new software version. To do this, you only need the LokProgrammer and the most current version of the LokProgrammer software. The updates will happen automatically whenever you write sound or data to a LokSound decoder. The future LokProgrammer software is being reviewed continuously. The latest, pertinent version can always be downloaded from our website, or can be installed automatically, through an internet-update function, on your computer.
Related
Related
Related
Related