1/2.7″ 5MP SMARTSENS CMOS H.265/H.264, Tri-stream IP Camera 12VDC, PoE 802.3af True Day & Night function with ICR mechanism IR Range up to 98′ (30m) Max. 20FPS/5MP, 1440p (2592×1944) Weather-resistant (IP66) D-WDR 3DNR ONVIF Profile S, Profile G Specifications Type Fixed Bullet Camera Sensor 1/2.7″ 5MP SMARTSENS CMOS Video encoding H.265/H.264 Megapixels 5MP Resolution 1440p, 2592×1944 3DNR Yes Scanning system Progressive 1080p # of IR LEDs 2pcs (850nm) Lens 2.8mm Viewing angle 131° Minimum illumination 0.05 Lux F Stop 1.2 Gamma correction Auto Gain control Auto White balance Auto Operating voltage 12VDC, PoE 802.3af Current Draw – IR Off 80mA max. IP Rating Weatherproof IP66 Operating temperature -22°~131° F (-30°~55° C) Dimensions ø2-13/16″x5-15/16″ (ø71×151 mm) Weight 13.4-oz (370g) Troubleshooting The screen is blank. Check that the camera is powered up. Check that the power supply’s polarity is correct. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. The screen image is dim. Clean the lens using a soft, clean cloth. Check that the light source is adequate. The screen image has poor contrast. Adjust the monitor’s contrast knob. Change the position of the camera. The screen image flickers. Change the position of the camera. The screen image is distorted. Change the position of the camera. The camera case is hot. Check that the correct power supply is in use.
