EVERBUILD® GRIPTITE® Construction Grab Adhesive 350ml An extra-tough high grab construction adhesive. EVERBUILD® GRIPTITE® is a ready to use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adheres to most common surfaces inside and outside the home. Bonds to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, uPVC and certain plastics. Usage Bonding dado rails, architrave and skirting Fixing parquet and cork flooring. Fixing wall cladding direct to internal wall surfaces or timber battens. Fixing battens directly onto walls without fastenings. Bonding carpet gripper systems to most floors without the need for nails or tacks. Bonding stair nosing to concrete or wooden stairs. Fixing polyester, wood, PVCu or metal thresholds. Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces. Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans Advantages Solvent based formula - quick drying / high early bond strength. Excellent adhesion/bond strength - adheres to most common surfaces. Good early grab properties - usable both horizontally and vertically High solids formulation - excellent gap filling properties. Suitable for use where both surfaces are non-porous. Excellent external weathering properties - suitable for exterior use Excellent chemical resistance Viscosity 1,800,000 cP Ash rate 50 +/- 1% VOC 30 +/- 1% Flash point -10°C WEPGRIPTITEC3