Electro Voice EVID-P6.2 6.5" 2-Way Coaxial Pendant Speaker with Horn Loaded Ti Coated Tweeter, Single - White The Electro Voice EVID-P6.2 loudspeaker system is a complete two-way pendant loudspeaker. The package consists of a bezel assembly, magnetic grille, rear enclosure, 6.5-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a titanium dome tweeter. The EVID-P6.2 loudspeaker utilizes a 2nd order crossover network with a comprehensive protection circuit to protect the network, woofer and tweeter drivers from excessive power levels. The EVID-P6.2 loudspeaker utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75W, 7.5W, 15W or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines or 8 ohm bypass. Selection is via a convenient switch on the front baffle, easily accessible by removing the magnetic grille. The perforated grille is finished in semi-gloss black or white powder-coated enamel. The baffle, bezel and rear-enclosure are constructed from UL 94V-0 rated ABS. The connections on the rear provide access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass-through to additional speakers. The EVID line of speakers has been designed to work together as a complete system in a wide range of different constructions. The pendant and ceiling loudspeakers provide wide dispersion, high efficiency, high-maximum output, ease of installation and wide range reproduction of music or voice. Features: Full bandwidth overload protection Front baffle wattage tap adjustment Magnetic grille for easy tap adjustment access Indoor and outdoor use UL1480A and CSA C22.2 certified for indoor installations and protected outdoor installations Specifications: Rated frequency range: 60 Hz - 20 kHz Sensitivity (SPL 1 W/1 m): 87 dB Coverage pattern: 115 deg. conical Power handling (at 8Ohms): 75 W (with overload protection) Rated impedance: 8 Ohms Recommended High-Pass frequency: 60 Hz Input configuration: 8Ohms; 70V/100V 70V/100V power taps: 1.8 (70V only)/3.7/7.5/15/30 W LF transducer: 6.5 in (165 mm) high-compliance driver (weatherized cone) HF transducer: 1 in (25 mm) titanium dome Mounting system: Rear mounted suspension points Acoustic design: Ported cabinet, two-way design, internally damped, w/passive crossover Approvals: CE, UL 1480A, CSA 22.2 Cabinet construction: UL94V-0 rated enclosure and baffle Grille construction: Powder-coated steel Dimensions (DxDia.): 11.9 x 12.2" (30.23 x 30.99cm) Weight: 11.65 lbs (5.28kg)
Related
Related
Related
Related