The Varipump 10000 by Evolution Aqua is a controllable pond pump, suitable for large ponds and aimed to go with the EasyPod and Nexus range of filters. Output flowrate and therefore the energy consumption can be controlled at the push of a button using the digital control panel . Available in three sizes, these quiet and reliable pumps are powerful enough to run the largest of ponds and filters, and in the most demanding of situations. The control box allows fine adjustment in increments of 1%, once adjusted the display will continuously show the power consumption in watts. These pumps are suitable for use in and out of the pond and come with a single stepped barbed hosetail which will take 25mm, 32mm and 38mm hose. The Varipump 10000 also has two further smooth hose connectors but this time they are not stepped, these will take 40mm hose. These fittings are not solvent weldable, but can be used with the appropriate boot fittings to allow connection to rigid pipework. The slots in the inlet cage are 5mm and the cage clips off easily for maintenance or to reveal a threaded inlet connection. The Varipumps sit in a removable foot which can be secured to a base should you wish and the pump can then be slid out of the foot for maintenance. The Evolution Aqua Varipumps are supplied with 2m of cable to the weatherproof control box and then 10m from the control box to the pump, this 10m cable has a cable connector so the pump can be easily disconnected from the control box. Supplied with a 2 year guarantee.Evolution Aqua Varipump 10000 Pond Pump Features• Ideal for EasyPod and Nexus range of filters• Remote Panel Control Panel• Electronically controllable in 1% increments• Can be used inside or outside of the pond• Can be connected to rigid pipework ("boot" fittings not included)• Flowrate of up to 10000 LPH (2200 GPH)
