EXPERT Wood Stripper Pro - Multi-Surface Paint & Stain Remover

Stain & Seal Supply Verified independent store

→

EXPERT Wood Stripper Pro – Multi-Surface Paint & Stain Remover Remove stubborn coatings with EXPERT Wood Stripper Pro, a professional-grade coating removal system engineered to str ip multiple layers of paint, stain, and coatings from a wide range of surfaces. EXPERT Wood Stripper Pro is a high-performance coatings remover designed to break down coatings efficiently while maintaining a low-odor working environment. This professional remover is ideal for restoration professionals and contractors tackling demanding coating removal projects across wood and other building materials. Key Performance Advantages EXPERT Wood Stripper Pro delivers powerful coating removal while offering practical advantages that professionals rely on: ✓ Multi-Surface CapabilityWorks on wood, concrete, brick, stone, metal, tile, fiberglass, and other substrates. ✓ Low-Odor Professional FormulaAdvanced solvent blend minimizes odor while maintaining heavy-duty stripping performance. ✓ No Neutralization RequiredUnlike caustic stripping systems, surfaces can be rinsed clean with water after removal. ✓ Flexible Application MethodsApply by brush, roller, or sprayer depending on project size and surface conditions. ✓ Heavy-Duty Coating RemovalDesigned to remove multiple layers of stain or paint in a single application when used correctly. ✓ Adjustable Thickness for Different JobsMix until paste consistency for vertical surfaces. Professional Restoration Applications EXPERT Wood Stripper Pro is designed for demanding restoration projects including: • Deck restoration• Fence refinishing• Exterior wood restoration• Paint removal from masonry and concrete• Coating removal from metal and composite materials• Multi-layer stain or paint removal projects Its powerful formula allows contractors to tackle coatings across multiple building surfaces with a single product, simplifying restoration workflows. Mixing & Application Instructions Coverage Coverage varies depending on coating thickness and application method. Approximately 50–200 sq. ft. per gallon depending on surface and mixture thickness. Preparation • Cover nearby plants, grass, and surrounding surfaces using plastic sheeting• Wear appropriate full PPE during application• Test a small inconspicuous area before full application Mixing EXPERT Wood Stripper Pro may be adjusted to different consistencies depending on application method: • Gel / Paste consistency: Mix with drill mixer on high speed for approximately 1 minute until thickened• Sprayer application: Mix briefly (about 10 seconds)• If mixture becomes too thick, allow product to rest 30 minutes to thin naturally Application Apply using: • Brush• Roller• Sprayer (remove filters if spraying) For best performance: • Apply between 50°F and 100°F• Lower temperatures increase dwell time• Multiple spray applications may be required for heavy coatings Dwell Time Allow product to dwell 30 minutes to several hours depending on coating thickness. • Product must remain wet while working• In direct sunlight, cover with plastic to prevent premature drying• Test periodically by scraping to determine when coatings release easily Removal Once coatings lift: • Remove with pressure washer or scraper• Work from bottom upward• Use approximately a 45° spray angle when pressure washing Some surfaces may require: • A second application• Light brushing with a wire brush while surface is still wet Rinse & Clean-Up • Rinse surface and surrounding areas thoroughly with water• Collect removed coatings and dispose according to local regulations• Do not rinse waste into soil, drains, or waterways• Clean all tools and equipment with soap and water immediately after use Warnings Always wear PPE when using product including: • Chemical-resistant gloves• Long sleeves and long pants• Closed-toe footwear• Protective spray suit or coveralls• Head covering• NIOSH-approved respirator Use only outdoors or in well-ventilated environments. Wash skin thoroughly after handling and launder contaminated clothing separately. Lead Paint Warning Structures built before 1978 may contain lead-based paint. Disturbing these coatings can release hazardous lead dust. Follow EPA guidelines before beginning restoration projects involving older structures. First Aid If inhaled: Move to fresh air and seek medical attention if irritation persists.If swallowed: Do not induce vomiting. Call poison control immediately.If on skin: Rinse with water for at least 15 minutes and remove contaminated clothing.If in eyes: Rinse continuously for 15–20 minutes and seek medical attention if irritation persists. Storage & Shelf Life • Store upright in original container• Keep between 33°F and 90°F• Keep away from acids, oxidizers, and heat sources• Do not store in metal containers• Shelf life: Up to 24 months unopened Show more