Flow rate: 0.5ml to 105ml/min Modes of operation: Continuous dispensing, Volume dispensing, Constant flow rate, etc. Supplied tubing: 15.24 cm / Tubing size: Any 5mm O.D. tubing Data format: ASCII / Data protocol: UART & 12C Pump head: 2 meters The EZO-PMP Pump consists of three main components: a cassette, a 12V motor and a control system. The actual peristaltic pumping is done within the cassette. The inner workings of the cassette are fragile and must be dismantled by hand. It has been designed to be easily detached from the motor and disassembled. The 12V motor and its control system are soldered together. Both components are designed to operate as one single unit. The control system has three main components: a keyed data and its power connector, a 12 – 24V power input and a Status indicator LED. Before calibration is attempted, all the air bubbles should be removed from the tubing. This is done by running the pump while tapping the tubing. If air bubbles are not removed from the tubing, they will slowly group together into larger air bubbles. Over time this will lead to accuracy issues.
