Hydraulic Swing Gate Automation for Large and High-Use Gates The FAAC 400 CBAC Standard Single Kit is a complete hydraulic swing gate automation package for a single vehicular gate leaf. Available in 115 VAC or 230 VAC, the kit combines the FAAC 400 CBAC hydraulic operator with the matching 455D control panel, prewired fiberglass enclosure, radio controls, and monitored photoeyes needed for a properly controlled single-swing gate system. The 400 CBAC is designed for demanding residential, condominium, commercial, and controlled-access applications where gate size and operating frequency exceed what many lighter-duty linear operators are designed to handle. It supports gate leaves from 9.5 to 16 feet long and up to 1,300 pounds, with up to 1,390 lbf of hydraulic thrust and an approximate 18-second opening time to 90 degrees. Unlike an electromechanical screw-drive operator, the FAAC 400 uses an electric pump and hydraulic piston to move the gate. The CBAC version provides hydraulic locking in both the open and closed positions, helping hold the gate securely when the operator is not running. A key-protected manual release allows the gate to be moved manually during a power failure or service condition. The 115V and 230V kits provide the same gate capacity and core hydraulic performance. Choose the voltage that matches the electrical service available at the installation. Key Features Complete FAAC 400 CBAC Standard single swing gate operator kit Available in 115 VAC and 230 VAC configurations Handles gate leaves up to 16 ft long and 1,300 lb Hydraulic locking in both the open and closed positions Up to 1,390 lbf of thrust Approximately 18-second opening time to 90 degrees Rated for up to 70 cycles per hour under specified conditions Hydraulic pump and piston drive provide smooth, controlled gate movement Self-lubricating hydraulic system Key-protected manual release for power outages and service Adjustable hydraulic bypass valves allow opening and closing force adjustment 455D control panel supports programmable operating logic, timing, and safety functions Prewired enclosure simplifies control panel, accessory, and loop detector connections Includes radio receiver and two transmitters for remote gate operation Includes XP30 monitored photoeyes for entrapment protection UL 325 compliant for Class I, II, III, and IV vehicular gate applications Technical Specifications Manufacturer: FAAC Series: 400 Model: 400 CBAC Standard Manufacturer Designation: 400 CBAC Standard Basic Single Kit Product Type: Standard single hydraulic swing gate operator kit Gate Configuration: Single swing gate leaf Voltage Options: 115 VAC (+10% / -6%) or 230 VAC (+6% / -10%) Operator Power: 220 W Operator Current: 2 A at 115V; 1 A at 230V Motor: Asynchronous single phase Thrust Capacitor: 25 µF at 115V; 8 µF at 230V Maximum Thrust Force: 1,390 lbf (620 daN) Pump Flow Rate: 1 liter/minute Effective Rod Stroke: 10.25 in (260 mm) 90° Opening Time: Approximately 18 seconds Minimum Gate Leaf Length: 9.5 ft Maximum Gate Leaf Length: 16 ft Maximum Gate Leaf Weight: 1,300 lb Use Frequency: Up to 70 cycles per hour Hydraulic Locking: Open and closed positions Manual Release: Key protected Operating Temperature: -4°F to 131°F (-20°C to +55°C) Thermal Protection: 248°F (120°C) Protection Rating: IP55 Operator Weight: 19 lb Operator Dimensions: 40.5 x 4.4 x 3.3 in Control Panel: FAAC 455D matched to selected voltage Required Gate Stops: Positive mechanical stops at fully open and fully closed positions UL 325 Classification: Class I, II, III, and IV applications Variants 115 VAC Standard Single Kit: Part Number 10420112.5 230 VAC Standard Single Kit: Part Number 1042011.5 Both versions use the FAAC 400 CBAC Standard hydraulic operator and provide the same maximum gate size, thrust, hydraulic locking, and operating speed. Select the voltage that matches the site's electrical supply. What Comes with This Kit 1 FAAC 400 CBAC Standard hydraulic swing gate operator 1 Prewired 14 x 16 in. fiberglass enclosure matched to selected voltage 1 FAAC 455D control panel matched to selected voltage 1 FAAC 433 RC plug-in receiver 2 FAAC XT4 433 RC four-channel transmitters 1 Pair FAAC XP30 monitored photobeam photoeyes 2 XP30 conduit adapters Installation Considerations The FAAC 400's published gate capacity assumes a strong, rigid gate with properly functioning hinges and smooth, level movement throughout its travel. Gate design, wind load, mounting geometry, temperature, and the condition of the gate can affect actual operating performance. Positive mechanical stops are required at the fully open and fully closed positions. Although the 400 CBAC hydraulically locks the gate in both directions, FAAC recommends an electric or magnetic lock for gate leaves longer than 12 feet. The included 455D control system requires a monitored closing safety device for operation. Additional entrapment protection may be required depending on the gate layout and installation. Conclusion The FAAC 400 CBAC Standard Single Kit combines a high-capacity hydraulic swing gate operator with the control, enclosure, radio, and monitored photoeye components needed for a single-leaf installation. It is suited to larger or more frequently operated swing gates where hydraulic drive, open-and-close locking, and higher operating frequency are important. Choose the 115V or 230V kit according to the electrical service available at the site and verify gate dimensions, weight, mounting geometry, and required safety devices before installation. Download Specs Download Manual
Related