Facilan™ C8 Filament Facilan™ C8 is an Additive Manufacturing Filament Designed for Manufacturing using 3D Printing. Facilan™ C8 Fused Deposition Modelling filament has a higher tensile strength than ABS Facilan™ C8 has higher impact strength than PLA. On most printers, Facilan™ C8 should 3D Print without visible layers. Facilan™ C8 has the best layer adhesion properties of any 3D printing material. Facilan™ C8 has the best surface quality of any FDM material. The material has a soft touch feel. Facilan™ C8 should be smooth with an even matte surface finish. Developed for high throughput manufacturing applications. Consumer-friendly parts for true Additive Manufacturing. Facilan™ C8's printing profile is available in the Ultimaker Cura Marketplace. This material has been designed to be used in manufacturing applications. With better interlayer bonding, smoother surfaces as well as higher strength, Facilan™ C8 is a true Additive Manufacturing material made for demanding end-use part applications. Facilan™ C8 Material Properties Density 1.4 g/cm³ Tensile Strength 45 MPa Elongation at yield 4% Tensile Modulus 3000 MPa Flexural Strength 67 MPa Flexural Modulus 3640 MPa Izod impact strength (notched) 7 kJ/m2 Shore D Hardness 72 Heat Deflection Temperature 55°C Print Settings Bed Temperature: 35-50°C Adhesion: Magigoo Original on glass or a PEI Sheet Print Temperature: 195 °C (180-210°C). Print Speed: 40 mm/s TDS You can find the Technical Data Sheet for Facilan™ C8 here. MSDS The Material Safety Data Sheets for Facilan™ C8 are available for download in the following languages: English Spanish French Italian German Dutch
