The display has a similar character size to many of the largest varios and its high contrast custom LCD is easy to read even in bright sunlight, yet it only weighs 28 grams and measures just 37mm across (excluding strap) making it the world's lightest and smallest multifunction alti-vario! Features 1ft resolution altimeter, max 19,999 ft. with Metres/mixed settings. Sensitive, loud vario QNE, QFE, QNH altimeter references with pressure/height settings. Barometric pressure Barometric trend (for predicting weather changes) G-meter, Max G-meter (Plus version only) Vario averager 5-60 seconds (Plus version only) Temperature C/F Max lift Max Altitude (permanently stored until reset) Max Sink Minimum altitude Battery level/voltage Time clock Alarm timer Stopwatch with auto flight timer Volume control Vario threshold settings Damping factor setting Pace (vario tone scale adjustment) Unique electronic serial number Rechargeable, charger supplied Audio headphone socket 28 grams 37x37mm Altimeters The ALTI button gives access to 3 altimeter references. Alti 1 can be zeroed at take-off, alti 2 can be set to height or pressure (QNH), the third option is QNE which gives altitude relative to 1013.25mB or sea level. There is also a barometer option which can be zeroed and provides a sensitive indication of weather changes prior to flying. SET button The middle button (SET) first displays the vario averager followed by the G-Meter, Max G, temperature, maximum and minimum altitude and max lift and sink and battery level. (Averager and G-Meter are on the Micro Alti Plus only). A long press on the SET button allows the user to make changes according to the user's preferences which includes: Volume, lift and sink thresholds, damping factor (or response time) pace (tone scale adjustment) and unit selection (metres/feet/mixed). The last key press in this sequence reveals the vario's unique serial number. TIMER Button The TIMER button gives access to the time clock, stopwatch and alarm timer. An initial press of the TIMER button shows current time and will automatically revert to the previous mode, a second press gives the Alarm timer which can be used as an alarm clock or tank timer for paramotors and settings are permanently retained for ease of use. A third press of the TIMER key gives the stopwatch display, this can be started, paused and restarted with further key presses and can be zeroed with a long press. A flight timer can be initiated by selecting AUTO and the timer will then automatically start after a small change of height. Audio tones The vario's super loud tones start with a modulated "pip-pip" that increases in rate to indicate lift and a continuous tone for sink. Frequency and interrupt rate vary according to rate of climb/descent. Averaging and thresholds can be set to suit the user preference and audio tones are surprisingly loud! Mounting The Micro Alti can be mounted on your risers or on your wrist. We also supply adhesive hook and loop fastener pads that will stick to most surfaces and can be sewn onto clothing or it can be panel mounted. Battery The battery is a 100mA re-chargeable Lithium Polymer type that is automatically re-charged when the vario is plugged in to any USB 5 volt supply, such as a computer, phone charger, satnav lead or solar charger and we include a neat little charger that plugs into your car's cigarette lighter socket. The vario lights up when charging and a full charge of one hour will supply the vario for up to 5 days of typical use, without having to rely on the sun shining and there are no expensive batteries to buy! Mode switch The mode switch allows the Micro Alti to be used in power saving mode (displaying just the altitude and time). This is particularly useful if you hike and fly! The mode switch will mute the vario in the middle position. Guarantee The Fairhaven Micro Alti is fully guaranteed for 12 months.
