NEW FANG STOPS The Fang Clamp is a stainless steel side-bite hold-down built for jobs where a vacuum isn’t an option. It drives teeth into the edge of your material, locking parts from the side and keeping them put even when the bottom side is uneven or rough. Use them on CNC router spoilboards or fixture plates with 1/4-20 or M6 screws for quick setups. Made of Stainless steel in America Side-bite hold down for uneven or "rough" material Screw to spoilboards or fixture plates Use wood screws or threaded like 1/4-20 or M6 Compact design keeps clamp footprint minimal Ideal for slab flattening and tricky OP1 workholding Works on T-tracks, fixture plates, and spoilboards Size: 30mm wide x 78mm long Includes Gridfinity Storage Bin Hardware Kit Includes Each set of 4 includes a hardware kit. Thus, 16 Fang Clamps would have 4 Hardware Kits. 6ct - #10 x "Small" Square #2 wood screws 6ct - #10 x "Medium" Square #2 wood screws 6ct - Neoprene / Steel washers 6ct - Roller Washers - for spacing under/on top of a Fang clamp. 2ct - Stop Wedges - used for the "stop side." The included Hardware Kit makes setups easier and faster and also helps to prevent excessive screw force from bending the clamps. NEW – Fang Stops Fang Stops are designed to be a sturdier, bigger sibling to Fang Clamps. Use these as the "fixed" setup side. If selected under Kit above, we will include two (2) Fang Stops per four (4) Fang Clamps. Fang Stop option includes:For every 4ct Fang Clamps Fang Stop - Stainless steel Teeth- 2ct Fang Stop - Plastic Base - 2ct #10 Square #2 screws, 1.25" long - 6ct Neoprene / Steel Washers - 6ct Tip: You can use a screw or "stop" against the dimple at the back end of the clamp to make a more repeatable and steadfast hold.
Related
Related
Related
Related